Select your country
MAPA Home > Hand protection selection guide > Protections > Cut protection >  Heavy-duty work  >  Kronit 387

Kronit 387

Ultimate cut protection for heavy handling in oily environments

  • Excellent cut resistance (palm, thumb and index made from para-aramide fibres)
  • Protection against humidity, and good resistance to oils and greases due to nitrile coating
  • Good resistance to puncture and abrasion

Specific features

The 387 offers high levels of protection. It’s a longer glove with the thumb, index and palm made from para-aramide fibres, with a reinforced
HDPE band across the palm for better resistance when used during intensive handling.

Applications

  • Mechanical industry
    • Cutting and stamping metal
    • Handling aluminium strips
    • Handling sharp sheet metal
    • Working with hot, sharp and oily parts
  • Environment
    • Sorting metal and plastic waste

Product details

  • Cat. 2
  • Mechanical hazards EN 388
    4532
  • Heat and fire EN 407
    X1XXXX
  • ISO 13997:
    12N (1223g)
Material Nitrile
Colour Green
Interior Finish Textile support from para-aramide and HDPE fibres
Exterior Finish Pebbled
Length (inches) 12.20
Thickness (inches)
Size 7 9
Packaging 1 pair/bag
10 pairs/carton

Authentification & Certificates

Cut Protection - Kronit 387

Operating
instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • It is not recommended for persons sensitized to dithiocarbamates and thiazoles to use these gloves.
  • Put the gloves on dry, clean hands.
  • Rub over the gloves stained with oil or grease using a dry cloth before taking them off.
  • Inspect the gloves for snags or tears before reusing them.

Storage conditions

Store the gloves in their original packaging protected from light and humidity.

Laundering conditions

Caution : using the gloves or submitting them to a cleaning or laundering process which is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

  • This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.
  • This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).