Select your country
MAPA Home > Hand protection selection guide > Protections > Liquidproof protection >  Pylox V-20

Pylox V-20

Hand-specific, curved-finger design for low hand fatigue, excellent fit.

  • Loose cuff design provides ventilation for cooling comfort.
  • Liquid-tight, performs well against acids, caustics, alcohols, aldehydes, oils, and grease.

Specific features

Light bisque finish provides a safe grip for wet or dry applications.

Applications

  • Automotive/mechanical industry
    • Assembly of small parts
  • Mechanical industry
    • Precision assembly
  • Other industries
    • Biotechnology
    • Wood working

Product details

  • Cat. 1
  • Low Chemical Protection EN 374
  • Micro-organisms EN 374
Material PVC
Colour Yellow
Interior Finish Powdered
Exterior Finish Smooth
Length (inches) 10.5"
Thickness (inches) 0.020" (20 mil)
Size 8 9
Packaging 12 pairs/bag
72 pairs/carton

Authentification & Certificates

Operating
instructions

Instructions for use

  • Put the gloves on dry, clean hands.
  • These gloves are designed for single use only.
  • Do not touch the external side of the gloves when taking them off. Fold back the cuff end and pull them off while turning them inside out.

Storage conditions

  • Store the gloves in their original packaging protected from light and humidity, far from heat sources.

Legislation

  • This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.
  • This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Chemical chart

Chemical Product CAS # BTT
(minutes)		 Permeation
level		 Standard Degradation
level		 Rating
2-Propanol (Isopropanol) 99% 67-63-0 208 4 ASTM F739 4
++
Acetic acid 10% 64-19-7 NT NT 4
NA
Acetic acid 50% 64-19-7 257 5 ASTM F739 4
++
Acetic acid 99% 64-19-7 85 3 ASTM F739 NT
NA
Acetone 99% 67-64-1 5 0 ASTM F739 1
-
Acrylonitrile 99% 107-13-1 4 0 ASTM F739 NT
NA
Ammonium hydroxide solution 29% 1336-21-6 480 6 ASTM F739 4
++
Aniline 99% 62-53-3 480 6 ASTM F739 3
++
Benzene 99% 71-43-2 7 0 ASTM F739 4
=
Chromic Acid 50% 7738-94-5 480 6 ASTM F739 4
++
Cyclohexane 99% 110-82-7 26 1 ASTM F739 4
+
Diethanolamine 97% 111-42-2 480 6 ASTM F739 4
++
Dimethylsulfoxide 99% 67-68-5 60 2 ASTM F739 3
+
Ethanol 95% 64-17-5 31 2 ASTM F739 4
+
Ethylene glycol 99% 107-21-1 480 6 ASTM F739 4
++
Formaldehyde 37% 50-00-0 480 6 ASTM F739 4
++
Furfural 99% 98-01-1 23 1 ASTM F739 NT
NA
Hydrazine 35% 302-01-2 480 6 ASTM F739 4
++
Hydrazine 70% 302-01-2 480 6 ASTM F739 4
++
Hydrochloric acid 10% 7647-01-0 480 6 ASTM F739 4
++
Hydrochloric acid 35% 7647-01-0 NT NT 4
NA
Hydrochloric acid 37% 7647-01-0 480 6 ASTM F739 4
++
Hydrochloric acid 50% 7647-01-0 NT NT 4
NA
Hydrofluoric Acid 10% 7664-39-3 NT NT 4
NA
Hydrofluoric Acid 49% 7664-39-3 110 3 ASTM F739 4
++
Isobutyl alcohol 99% 78-83-1 167 4 ASTM F739 NT
NA
m-Cresol 97% 108-39-4 150 4 ASTM F739 4
++
Methanol 85% 67-56-1 NT NT 4
NA
Methanol 99% 67-56-1 16 1 ASTM F739 4
+
N-methyl-2-Pyrrolidone 99% 872-50-4 60 2 ASTM F739 NT
NA
N-N dimethyl acetamide 99% 127-19-5 20 1 ASTM F739 1
-
Naphtha (Stoddart Solvent) mixture 8052-41-3 42 2 ASTM F739 4
+
Nitric acid 10% 7697-37-2 NT NT 4
NA
Nitric acid 20% 7697-37-2 NT NT 4
NA
Nitric acid 40% 7697-37-2 NT NT 4
NA
Nitric acid 50% 7697-37-2 114 3 ASTM F739 4
++
p-dioxane (1,4-Dioxane) 99% 123-91-1 16 1 ASTM F739 1
-
Phenol 85% 108-95-2 76 3 ASTM F739 4
++
Phosphoric acid 75% 7664-38-2 NT NT 4
NA
Phosphoric acid 85% 7664-38-2 480 6 ASTM F739 4
++
Potassium Hydroxide 50% 1310-58-3 480 6 ASTM F739 4
++
Sodium hydroxide 20% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 40% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 50% 1310-73-2 480 6 ASTM F739 4
++
Styrene 99% 100-42-5 27 1 ASTM F739 NT
NA
Sulfuric acid 10% 7664-93-9 480 6 ASTM F739 4
++
Sulfuric acid 40% 7664-93-9 480 6 ASTM F739 4
++
Sulfuric acid 50% 7664-93-9 480 6 ASTM F739 4
++
Toluene Diisocyanate (TDI) 80% 584-84-9 480 6 ASTM F739 2
+
Triethanolamine 98% 102-71-6 480 6 ASTM F739 4
++
Turpentine mixture 8006-64-2 76 3 ASTM F739 4
++
Xylene 99% 1330-20-7 10 1 ASTM F739 3
=

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed suitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.