Temp-Tec NL-56

A double-layer glove, with thermal insulation and chemical resistance

  • Multi-purpose chemical resistance (acids, aliphatic solvents) increased by the thickness of the material
  • Excellent thermal insulation, due to double-knit cotton
  • Good grip of wet or slippery objects,

Applications

  • Food industry
    • Filleting Fish
  • Mechanical industry
    • Chemical treatment of metals
    • Oil quenching of steel
  • Other industries
    • Boiler room work
    • Handling of hot piping
    • Handling of moulds in the ceramic industry
    • Manufacture of adhesives
    • Manufacture of insulating electric wires
    • Road works in cold conditions
    • Steam cleaning
  • Petrochemical industry
    • Sampling of hot petrochemical products
  • Rubber industry
    • Polymer extrusion

Product details

  • Cat. 3
  • Mechanical hazards EN 388
    2212
  • Specific Chemical Protection EN 374
    ACJKL
  • Heat and fire EN 407
    02XXXX
  • Cold hazards EN 511
    111
Material Neoprene
Colour Black / Blue
Interior Finish Knitted thermal protection
Exterior Finish Pebbled
Length (inches) 14"
Thickness (inches) Heavy Wt.
Size 8 9 10
Packaging 6 pairs/carton

Operating
instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests. For very high or low temperatures, be careful that a sustained contact does not cause burns.
  • It is not recommended for persons sensitized to dithiocarbamates to use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONAL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Ensure the inside of the gloves is dry before putting them on again.

Storage conditions

Store the gloves in their original packaging at a temperature not below 5°C.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
  • in use with a solvent (diluents, etc...) : rub over with a dry cloth
  • in use with acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth

Caution : improper use of the gloves or submitting them to a cleaning or laundering process that is not specifically recommended can alter their performance levels.

Legislation

  • This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.
  • This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
2,4-Di-tertiary Butylphenol 99% 96-76-4 29 1 ASTM F739 NT
NA
Acetonitrile 99% 75-05-8 66 3 EN 374-3:2003 NT
NA
Methanol 85% 67-56-1 480 6 EN 374-3:2003 NT
NA
Methanol 99% 67-56-1 480 6 EN 374-3:2003 NT
NA
n-Heptane 99% 142-82-5 41 2 EN 374-3:2003 NT
NA
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 40% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sulfuric acid 96% 7664-93-9 86 3 EN 374-3:2003 NT
NA

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.