Chem-Ply N440

Ultra-high performance chemical protection

  • Broad chemical resistance (acids, aliphatic solvents, solvent mixtures), increased by the thickness of the material
  • Good grip, due to embossed texture
  • Easy to pull on and off, due to chlorinated interior

Specific features

The two neoprene layers superimposed increase the mechanical and chemical resistance. The glove red inner layer ensures that any wear is clearly visible, providing optimal safety for the user.


  • Mechanical industry
    • Surface treatment of metals (acids)
    • Etching / degreasing
  • Chemical industry
    • Site pollution control
    • Handling on alkylation units
    • Handling and transporting drums of chemical products

Product details

  • Cat. 3
  • Mechanical hazards EN 388
  • Type A
    Specific Chemical Protection EN 374
  • Micro-organisms EN 374
Material Neoprene
Colour Black
Interior Finish Chlorinated
Exterior Finish Embossed texture
Length (inches) 14
Thickness (inches) 0.030 (30 mil)
Size 9 10 11
Packaging 1 pair/bag
6 pairs/bag
48 pairs/carton
Chemical Protection - Chem-Ply N440 - situation

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • It is not recommended for persons sensitized to dithiocarbamates to use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website or contact the Technical Customer Service - MAPA PROFESSIONNEL ( in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.

Storage conditions

Store the gloves in their original packaging at a temperature not below 5°C.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
  • in use with a solvent (diluents, etc...) : rub over with a dry cloth
  • in use with acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth

Caution : using the gloves or submitting them to cleaning or laundering process which are not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.


This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).


Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.