StanSolv AF-492

Good mechanical resistance and long-lasting chemical protection

  • Dexterity and comfort, due to the anatomical shape and the quality of the flock-lining
  • Longer service life: excellent mechanical resistance (abrasion, perforation)

Applications

  • Automotive/mechanical industry
    • Machining parts using cutting oil
    • Treating/degreasing metals with solvents
  • Chemical industry
    • Manufacture and application of paints and varnishes
  • Other industries
    • Application of pesticides
    • Cleaning of printing-press rollers

Product details

  • Cat. 3
  • Mechanical hazards EN 388
    4101
  • Specific Chemical Protection EN 374
    AJKL
  • Micro-organisms EN 374
Material Nitrile
Colour Green
Interior Finish Flocked
Exterior Finish Embossed texture
Length (inches) 12.5"
Thickness (inches) 0.015" (15 mil)
Size 7 8 9 10 11
Packaging 12 pairs/bag
72 pairs/carton
Chemical Protection - StanSolv AF-492 - situation

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because
    the conditions of use at workplace may differ from the "CE"-type tests.
  • Persons sensitised to dithiocarbamates and thiazoles should not use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONAL in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from light, humidity and heat.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
  • in use with a solvent (diluents, etc...) : rub over with a dry cloth
  • in use with acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth

Caution : improper use of the gloves or submitting them to any cleaning or laundering process which is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

  • This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.
  • This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH)

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
1,1,1-Trichloroethane 99% 71-55-6 45 2 EN 374-3:2003 1
-
2-Butoxyethanol (Butyl Cellusolve) 99% 111-76-2 236 4 EN 374-3:2003 3
++
2-Nitropropane 99% 79-46-9 NT NT 1
NA
2-Propanol (Isopropanol) 99% 67-63-0 360 5 EN 374-3:2003 3
++
Acetic acid 99% 64-19-7 47 2 EN 374-3:2003 1
-
Acetone 99% 67-64-1 3 0 EN 374-3:2003 1
-
Bromine 100% 7726-95-6 18 1 EN 374-3:2003 NT
NA
Bromobenzene 99% 108-86-1 9 0 EN 374-3:2003 NT
NA
Butyl Acetate 99% 123-86-4 25 1 EN 374-3:2003 1
-
Cyclohexane 99% 110-82-7 480 6 EN 374-3:2003 4
++
Cyclohexanone 99% 108-94-1 29 1 EN 374-3:2003 1
-
Dichloromethane (Methylene Chloride) 99% 75-09-2 1 0 EN 374-3:2003 1
-
Diethylamine 98% 109-89-7 17 1 EN 374-3:2003 1
-
Dimethylformamide 99% 68-12-2 NT NT 1
NA
Dimethylsulfoxide 99% 67-68-5 47 2 EN 374-3:2003 1
-
Ethanol 95% 64-17-5 130 4 EN 374-3:2003 3
++
Ethylene glycol 99% 107-21-1 NT NT 4
NA
Fuel oils mixture 68476-34-6 480 6 EN 374-3:2003 4
++
Hydrochloric acid 10% 7647-01-0 480 6 EN 374-3:2003 4
++
Hydrochloric acid 35% 7647-01-0 480 6 EN 374-3:2003 4
++
Methanol 99% 67-56-1 49 2 EN 374-3:2003 1
-
Methyl Ethyl Ketone (2-Butanone) 99% 78-93-3 5 0 EN 374-3:2003 1
-
Methyl methacrylate 95% 80-62-6 11 1 EN 374-3:2003 1
-
Methylisobutylketone 99% 108-10-1 15 1 EN 374-3:2003 1
-
n-Heptane 99% 142-82-5 480 6 EN 374-3:2003 NT
NA
N-methyl-2-Pyrrolidone 99% 872-50-4 35 2 EN 374-3:2003 1
-
N-N dimethyl acetamide 99% 127-19-5 10 0 EN 374-3:2003 1
-
Naphtha, Hydrodesulphurized Heavy mixture 64742-82-1 480 6 EN 374-3:2003 4
++
Naphtha, Hydrotreated Heavy mixture 64742-48-9 480 6 EN 374-3:2003 4
++
Pentane isomers mixture NA 480 6 EN 374-3:2003 NT
NA
Phosphoric acid 75% 7664-38-2 480 6 EN 374-3:2003 4
++
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 4
++
Sodium hydroxide 40% 1310-73-2 480 6 EN 374-3:2003 4
++
Sodium hydroxide 50% 1310-73-2 480 6 EN 374-3:2003 4
++
Styrene 99% 100-42-5 9 0 EN 374-3:2003 1
-
Sulfuric acid 96% 7664-93-9 80 3 EN 374-3:2003 1
-
t-Butyl Methyl Ether 98% 1634-04-4 240 4 EN 374-3:2003 3
++
Tetrachloroethylene (Perchloroethylene) 99% 127-18-4 103 3 EN 374-3:2003 3
++
Tetrahydrofurane 99% 109-99-9 4 0 EN 374-3:2003 1
-
Toluene 99% 108-88-3 16 1 EN 374-3:2003 1
-
Trichloroethylene 99% 79-01-6 4 0 EN 374-3:2003 1
-
Unleaded gasoline mixture 8006-61-9 98 3 EN 374-3:2003 4
++
Vinyl acetate 99% 108-05-4 9 0 EN 374-3:2003 1
-
Xylene 99% 1330-20-7 29 1 EN 374-3:2003 1
-

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.