StanZoil NL-34/334

Excellent chemical resistance with enhanced rough grip

  • Soft, absorbent interlock knit cotton liner adds comfort, easy on-off, high-and low-temperature protection.
  • 1.5 AQL - Quality Assurance

Specific features

Unique multi-layer construction, to avoid thin spots and provide visual two-tone indicator.

Applications

  • Mechanical industry
    • Maintenance in wet environments (water, oil, greases, hydrocarbons)
  • Chemical industry
    • Handling and transporting chemicals
  • Petroleum industry
    • Handling

Product details

  • Mechanical hazards EN 388
    3121
  • Specific Chemical Protection EN 374
    ACJKL
  • Micro-organisms EN 374
  • Heat and fire EN 407
    X2XXXX
Material Neoprene
Colour Black / Blue
Interior Finish Textile support
Exterior Finish Non-slip grip
Length (inches) 12
Thickness (inches)
Size 6 7 8 9
Packaging 12 pairs/box
72 pairs/carton

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • It is not recommended for persons sensitized to natural latex proteins and dithiocarbamates to use these gloves.
  • Put the gloves on dry, clean hands.
    Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
    Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging at a temperature not below 5°C.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
  • in use with a solvent (diluents, etc...) : rub over with a dry cloth
  • in use with acids or alkalies : thoroughly rinse the gloves under running water,
    and rub over with a dry cloth

Caution : using the gloves or submitting them to another cleaning or laundering process that is not specifically recommended can alter their performance levels

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

  • This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.
  • This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
1,1,1-Trichloroethane 99% 71-55-6 20 1 ASTM F739 1
-
1,1,2-Trichloroethane 97% 79-00-5 7 0 ASTM F739 2
-
1,2 - dichloroethane 99% 107-06-2 6 0 ASTM F739 NT
NA
2-Bromo-ethyl acetate 97% 927-68-4 52 2 ASTM F739 2
=
2-Hydroxyethyl Methacrylate 97% 868-77-9 480 6 ASTM F739 NT
NA
2-Propanol (Isopropanol) 99% 67-63-0 450 5 ASTM F739 4
++
2,6-Dimethyl-4-Heptanone (Diisobutyl Ketone) 80% 108-83-8 56 2 ASTM F739 3
+
Acetaldehyde 99% 75-07-0 5 0 ASTM F739 NT
NA
Acetic acid 10% 64-19-7 NT NT 4
NA
Acetic acid 50% 64-19-7 NT NT 4
NA
Acetic acid 99% 64-19-7 210 4 ASTM F739 4
++
Acetone 99% 67-64-1 8 0 ASTM F739 3
=
Acetonitrile 99% 75-05-8 53 2 ASTM F739 4
+
Acrylate 2-Hydroxyethyl 96% 818-61-1 480 6 ASTM F739 NT
NA
Acrylic acid 95% 79-10-7 480 6 ASTM F739 4
++
Acrylic acid 99% 79-10-7 480 6 ASTM F739 4
++
Acrylonitrile 99% 107-13-1 19 1 ASTM F739 NT
NA
Ammonium hydroxide solution 29% 1336-21-6 265 5 ASTM F739 4
++
Amyl Acetate 99% 628-63-7 25 1 ASTM F739 2
=
Amyl Alcohol 99% 71-41-0 480 6 ASTM F739 4
++
Aniline 99% 62-53-3 142 4 ASTM F739 4
++
Benzene 99% 71-43-2 3 0 ASTM F739 NT
NA
Benzotrichloride 100% 98-07-7 63 3 ASTM F739 NT
NA
Benzoyl Chloride 100% 98-88-4 28 1 ASTM F739 NT
NA
Benzyl Chloride 99% 100-44-7 17 1 ASTM F739 2
=
Butyl Acetate 99% 123-86-4 17 1 ASTM F739 1
-
Butyl Acrylate 99% 141-32-2 15 1 ASTM F739 1
-
Calcium Hydroxide 0,18% 1305-62-0 480 6 ASTM F739 4
++
Carbon disulfide 99% 75-15-0 1 0 ASTM F739 3
=
Carbon Tetrachloride 99% 56-23-5 24 1 ASTM F739 3
=
Chlorine 100% 7782-50-5 480 6 ASTM F739 NT
NA
Chlorine 99% 7782-50-5 44 2 ASTM F739 NT
NA
Chloroform 99% 67-66-3 2 0 ASTM F739 NT
NA
Chromic Acid 50% 7738-94-5 348 5 ASTM F739 4
++
Cumene 98% 98-82-8 22 1 ASTM F739 1
-
Cyclohexane 99% 110-82-7 35 2 ASTM F739 3
+
Cyclohexanol 99% 108-93-0 480 6 ASTM F739 4
++
Cyclooctadiene 99% 111-78-4 23 1 ASTM F739 NT
NA
Dibutyl Phthalate 99% 84-74-2 480 6 ASTM F739 4
++
Dichloromethane (Methylene Chloride) 99% 75-09-2 4 0 ASTM F739 3
=
Diethylamine 98% 109-89-7 4 0 ASTM F739 NT
NA
Dimethyl Sulfide 99% 75-18-3 2 0 ASTM F739 1
-
Dimethylformamide 99% 68-12-2 30 1 ASTM F739 3
=
Dimethylsulfoxide 99% 67-68-5 456 5 ASTM F739 4
++
Diphenyl Phospite NA 4712-55-4 480 6 ASTM F739 NT
NA
Ethanol 95% 64-17-5 363 5 ASTM F739 4
++
Ether (Diethyl Ether) 99% 60-29-7 4 0 ASTM F739 3
=
Ethyl acetate 99% 141-78-6 8 0 ASTM F739 NT
NA
Ethyl acrylate 99% 140-88-5 18 1 ASTM F739 1
-
Ethyl benzene 99% 100-41-4 1 0 ASTM F739 NT
NA
Ethyl Chloroformate 97% 541-41-3 4 0 ASTM F739 2
-
Ethylene glycol 99% 107-21-1 480 6 ASTM F739 4
++
Formaldehyde 37% 50-00-0 480 6 ASTM F739 4
++
Formic Acid 96% 64-18-6 NT NT 4
NA
Fuel oils mixture 68476-34-6 480 6 ASTM F739 NT
NA
Glutaraldehyde 50% 111-30-8 NT NT 4
NA
Hexachlorocyclopentadiene 100% 77-47-4 30 1 ASTM F739 NT
NA
Hydrazine 35% 302-01-2 480 6 ASTM F739 4
++
Hydrazine 70% 302-01-2 NT NT 4
NA
Hydrochloric acid 10% 7647-01-0 480 6 ASTM F739 4
++
Hydrochloric acid 35% 7647-01-0 NT NT 4
NA
Hydrochloric acid 37% 7647-01-0 480 6 ASTM F739 4
++
Hydrofluoric Acid 10% 7664-39-3 480 6 ASTM F739 4
++
Hydrofluoric Acid 49% 7664-39-3 480 6 ASTM F739 4
++
Hydrogen fluoride Anhydrous 99% 7664-39-3 35 2 ASTM F739 NT
NA
Hydrogen peroxide 30% 7722-84-1 NT NT 4
NA
Hypophosphorous Acid 50% 6303-21-5 480 6 ASTM F739 NT
NA
Isobutyl alcohol 99% 78-83-1 480 6 ASTM F739 4
++
m,o,p-Chlorotoluene mixture 25168-05-2 15 1 ASTM F739 NT
NA
Maleic Acid 9,1% 110-16-7 480 6 ASTM F739 4
++
meta-Xylene 99% 108-38-3 NT NT 2
NA
Methanol 85% 67-56-1 NT NT 4
NA
Methanol 99% 67-56-1 195 4 ASTM F739 4
++
Methyl Ethyl Ketone (2-Butanone) 99% 78-93-3 9 0 ASTM F739 1
-
Methyl methacrylate 95% 80-62-6 15 1 EN 374-3:2003 1
-
Methylamine 40% 74-89-5 391 5 ASTM F739 4
++
Methylisobutylketone 99% 108-10-1 19 1 ASTM F739 2
=
Mineral Spirits 100% 64475-85-0 127 4 ASTM F739 NT
NA
n-Butanol 99% 71-36-3 480 6 ASTM F739 4
++
n-Heptane 99% 142-82-5 50 2 ASTM F739 4
+
n-hexane 95% 110-54-3 36 2 ASTM F739 4
+
N-N dimethyl acetamide 99% 127-19-5 45 2 ASTM F739 2
=
n-Propanol 99% 71-23-8 480 6 ASTM F739 4
++
N,N-Diisopropylethylamine 99% 7087-68-5 301 5 ASTM F739 4
++
Naphtha (Stoddart Solvent) mixture 8052-41-3 241 5 ASTM F739 3
++
Naphtha Heavy mixture 68551-17-7 NT NT 4
NA
Naphtha VM&P mixture 8032-32-4 23 1 ASTM F739 4
+
Nitric acid 10% 7697-37-2 NT NT 4
NA
Nitric acid 20% 7697-37-2 NT NT 4
NA
Nitric acid 40% 7697-37-2 NT NT 4
NA
Nitric acid 50% 7697-37-2 NT NT 4
NA
Nitric acid 68% 7697-37-2 NT NT 4
NA
Nitric acid 70% 7697-37-2 NT NT 4
NA
Nitric acid 90% 7697-37-2 3 0 ASTM F739 NT
NA
Nitrobenzene 99% 98-95-3 52 2 ASTM F739 NT
NA
Nonylphenol 99% 25154-52-3 480 6 ASTM F739 NT
NA
Oleic Acid 90% 112-80-1 NT NT 3
NA
Oleum (free SO3) 30% 8014-95-7 10 0 ASTM F739 NT
NA
Parachlorobenzotrichloride 99% 5216-25-1 70 3 ASTM F739 NT
NA
Pentane 99% 109-66-0 NT NT 4
NA
Phenol 85% 108-95-2 480 6 ASTM F739 4
++
Phosphoric acid 75% 7664-38-2 480 6 ASTM F739 4
++
Phosphoric acid 85% 7664-38-2 480 6 ASTM F739 4
++
Potassium Hydroxide 50% 1310-58-3 480 6 ASTM F739 4
++
Potassium Iodide 59% 7681-11-0 480 6 ASTM F739 4
++
Propylene Oxide 99% 75-56-9 1 0 ASTM F739 NT
NA
Pyridine 99% 110-86-1 10 0 ASTM F739 1
-
Sodium Carbonate 21,6% 497-19-8 480 6 ASTM F739 4
++
Sodium hydroxide 20% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 40% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 50% 1310-73-2 480 6 ASTM F739 4
++
Sodium Thiosulfate 41,2% 7772-98-7 480 6 ASTM F739 4
++
Styrene 99% 100-42-5 2 0 ASTM F739 NT
NA
Sulfur Dichloride 100% 10545-99-0 30 1 ASTM F739 NT
NA
Sulfur Monochloride 100% 10025-67-9 480 6 ASTM F739 NT
NA
Sulfuric acid 10% 7664-93-9 480 6 EN 374-3:2003 4
++
Sulfuric acid 40% 7664-93-9 480 6 EN 374-3:2003 4
++
Sulfuric acid 96% 7664-93-9 88 3 ASTM F739 2
+
t-Butyl Methyl Ether 98% 1634-04-4 6 0 ASTM F739 NT
NA
tert-Butyl Hydroperoxide 70% 75-91-2 454 5 ASTM F739 NT
NA
Tetrachloroethylene (Perchloroethylene) 99% 127-18-4 7 0 ASTM F739 1
-
Tetrahydrofurane 99% 109-99-9 3 0 ASTM F739 3
=
Toluene 99% 108-88-3 6 0 ASTM F739 1
-
Trichloroethylene 99% 79-01-6 1 0 ASTM F739 NT
NA
Triethylamine 99% 121-44-8 35 2 ASTM F739 2
=
Trifluoroacetic Acid 99% 76-05-1 480 6 ASTM F739 4
++
Unleaded gasoline mixture 8006-61-9 8 0 ASTM F739 1
-
Vinyl acetate 99% 108-05-4 14 1 ASTM F739 2
=
Xylene 99% 1330-20-7 17 1 ASTM F739 1
-

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.