Trident 285

Good mechanical performance for long-lasting chemical protection

  • Longer service life and good impact protection, due to the thickness of the material
  • Forearm protection. Length: 60cm

Specific features

Reinforced grip for better handling

Applications

  • Other industries
    • Maintenance in wet environments
  • Mechanical industry
    • Maintenance in wet environments (water, oil, greases, hydrocarbons)

Product details

  • Cat. 3
  • Mechanical hazards EN 388
    2131
  • Specific Chemical Protection EN 374
    ABKL
  • Micro-organisms EN 374
Material Natural latex
Colour Blond
Interior Finish Chlorinated
Exterior Finish Reinforced grip
Length (inches) 23.62
Thickness (inches) 0.039
Size 8 9 10
Packaging 1 pair/bag
30 pairs/carton
Chemical Protection - Trident 285 - situation
Chemical Protection - Trident 285 - situation
Chemical Protection - Trident 285 - situation
Chemical Protection - Trident 285 - situation

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at the workplace may differ from the "CE"-type tests.
  • It is not recommended for persons sensitised to natural latex, dithiocarbamates and thiazoles to use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from direct sunlight, far from heat sources or electric equipment.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with a solvent (alcohol, etc...) : rub over with a dry cloth
  • in use with detergents, acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth
    Caution : improper use of the gloves or submitting them to a cleaning or laundering process, which is not specifically recommended, can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
Acetic acid 10% 64-19-7 480 6 EN 374-3:2003 NT
NA
Acetic acid 99% 64-19-7 138 4 EN 374-3:2003 NT
NA
Acetone 99% 67-64-1 43 2 EN 374-3:2003 NT
NA
Dimethylformamide 99% 68-12-2 147 4 EN 374-3:2003 NT
NA
Ethanol 95% 64-17-5 160 4 EN 374-3:2003 NT
NA
Formaldehyde 37% 50-00-0 480 6 EN 374-3:2003 NT
NA
Hydrochloric acid 10% 7647-01-0 480 6 EN 374-3:2003 NT
NA
Hydrochloric acid 35% 7647-01-0 480 6 EN 374-3:2003 NT
NA
Methanol 99% 67-56-1 131 4 EN 374-3:2003 NT
NA
Methyl Ethyl Ketone (2-Butanone) 99% 78-93-3 25 1 EN 374-3:2003 NT
NA
N-methyl-2-Pyrrolidone 99% 872-50-4 210 4 EN 374-3:2003 NT
NA
Phosphoric acid 75% 7664-38-2 480 6 EN 374-3:2003 NT
NA
Phosphoric acid 85% 7664-38-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 40% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 50% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sulfuric acid 10% 7664-93-9 480 6 EN 374-3:2003 NT
NA
Sulfuric acid 40% 7664-93-9 480 6 EN 374-3:2003 NT
NA
Sulfuric acid 50% 7664-93-9 480 6 EN 374-3:2003 NT
NA
Sulfuric acid 96% 7664-93-9 480 6 EN 374-3:2003 NT
NA

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.