Niprotect CC 529

Reinforced mechanical resistance for short-term operations

  • Manufacturing process guarantees a very low level of contaminants: rates of particles, non-volatile residue, extractables => compatible with ISO 5 class (Class M3.5 for International system)
  • 100% nitrile formula enables anti-static properties
  • Protection against accidental chemical splashes
  • Recommended for people who are sensitive to the proteins in natural latex

Product details

  • Cat. 3
  • Low Chemical Protection EN 374
  • Micro-organisms EN 374
  • Radio-active contamination EN 421
Material Nitrile
Colour White
Interior Finish Chlorinated
Exterior Finish Smooth with pebbled fingertips
Length (inches) 12
Thickness (inches) 0.004 (4 mil)
Size 6 7 8 9 10
Packaging 100 gloves/bag
1000 gloves/carton
Critical Environments - Niprotect CC 529 - situation

Operating instructions

Instructions for use

  • Store the gloves in their sealed packaging protected from direct sunlight, far from heat sources and electrical equipment. Maximum recommended storage time : 1 year.
  • It is not recommended that persons sensitized to dithiocarbamates use these gloves.
  • Visually inspect while donning for imperfections.
  • Put the gloves on dry, clean hands.
  • These gloves are designed for single use only.
  • Position the cuff over the garment to prevent skin exposure.
  • If significant contact with a chemical occurs, remove the gloves immediately and dispose of them as appropriate.
  • If gloves have been contaminated with chemicals, do not touch the external side of the gloves when taking them off. Fold back the cuff end and pull them off while turning them inside out.

Storage conditions

Store the gloves in their sealed packaging protected from direct sunlight, far from heat sources and electrical equipment. Maximum recommended storage time : 1 year.

Legislation

  • This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.
  • This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
2-Propanol (Isopropanol) 99% 67-63-0 11 1 ASTM F1383 NT
NA
Acetone 99% 67-64-1 1 0 ASTM F1383 NT
NA
Ammonium hydroxide solution 29% 1336-21-6 53 2 ASTM F1383 NT
NA
Benzene 99% 71-43-2 1 0 ASTM F739 1
-
Hydrochloric acid 37% 7647-01-0 110 3 ASTM F1383 NT
NA
Hydrotreated Light Naphthenic Distillate mixture 64742-53-6 480 6 ASTM F739 4
++
Kerosene mixture 8008-20-6 228 4 ASTM F739 4
++
Naphtha VM&P mixture 8032-32-4 10 0 ASTM F739 4
=
Unleaded gasoline mixture 8006-61-9 3 0 ASTM F739 1
-

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.