Solo Ultra 980

Excellent mechanical resistance, ideal in oily environments

  • Textured grip offers added safety when working in wet and dry conditions

Specific features

100% nitrile powder free ambidextrous exam gloves

Applications

  • Automotive/mechanical industry
    • Assembly of small oily parts
  • Laboratory
    • Manufacturing of medicines

Product details

  • Cat. 3
  • Low Chemical Protection EN 374
  • Micro-organisms EN 374
Material Nitrile
Colour Blue
Interior Finish Chlorinated
Exterior Finish Smooth with pebbled fingertips
Length (inches) 12
Thickness (inches) 0.008 (8 mil)
Size 6 7 8 9 10 11
Packaging 100 gloves/box
1000 gloves/carton

Operating instructions

Instructions for use

  • It is not recommended to persons sensitized to dithiocarbamates to use these gloves.
  • Put the gloves on dry, clean hands.
  • Position the cuff over the garment to prevent penetration of a liquid.
  • These gloves are designed for single use only.
  • Do not touch the external side of the gloves when taking them off. Fold back the cuff end and pull them off while turning them inside out.

Storage conditions

Store the gloves in their original packaging protected from direct sunlight, far from heat sources.

Legislation

  • This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.
  • This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
2-Propanol (Isopropanol) 99% 67-63-0 84 3 ASTM F739 4
++
Acetic acid 50% 64-19-7 93 3 ASTM F739 3
++
Acetone 99% 67-64-1 1 0 ASTM F739 1
-
Acetonitrile 99% 75-05-8 2 0 ASTM F739 2
-
Ammonium hydroxide solution 29% 1336-21-6 30 2 ASTM F739 4
+
Amyl Alcohol 99% 71-41-0 152 4 ASTM F739 3
++
Carbon Tetrachloride 99% 56-23-5 NT NT 1
NA
Dichloromethane (Methylene Chloride) 99% 75-09-2 1 0 ASTM F739 1
-
Diethylamine 98% 109-89-7 2 0 ASTM F739 1
-
Dimethylsulfoxide 99% 67-68-5 19 1 ASTM F739 1
-
Ethanol 95% 64-17-5 22 1 ASTM F739 4
+
Formic Acid 96% 64-18-6 5 0 ASTM F739 1
-
Hydrochloric acid 10% 7647-01-0 NT NT 4
NA
Hydrochloric acid 35% 7647-01-0 NT NT 4
NA
Hydrochloric acid 37% 7647-01-0 325 5 ASTM F739 4
++
Hydrogen peroxide 30% 7722-84-1 NT NT 4
NA
Methanol 99% 67-56-1 3 0 ASTM F739 3
=
n-Butanol 99% 71-36-3 50 2 ASTM F739 3
+
n-Heptane 99% 142-82-5 70 3 EN 374-3:2003 NT
NA
Naphtha Heavy mixture 68551-17-7 480 6 ASTM F739 4
++
Naphtha VM&P mixture 8032-32-4 24 1 ASTM F739 4
+
Nitric acid 50% 7697-37-2 46 2 ASTM F739 2
=
p-dioxane (1,4-Dioxane) 99% 123-91-1 3 0 ASTM F739 1
-
Phenol 85% 108-95-2 32 2 ASTM F739 1
-
Phosphoric acid 75% 7664-38-2 480 6 ASTM F739 4
++
Phosphoric acid 85% 7664-38-2 480 6 ASTM F739 4
++
Sodium hydroxide 20% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 40% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 50% 1310-73-2 480 6 ASTM F739 4
++
Sulfuric acid 10% 7664-93-9 480 6 ASTM F739 4
++
Sulfuric acid 40% 7664-93-9 480 6 ASTM F739 4
++
Sulfuric acid 50% 7664-93-9 480 6 ASTM F739 4
++
Sulfuric acid 96% 7664-93-9 22 1 EN 374-3:2003 NT
NA
Toluene 99% 108-88-3 2 0 ASTM F739 1
-
Unleaded gasoline mixture 8006-61-9 8 0 ASTM F739 1
-
Xylene 99% 1330-20-7 2 0 ASTM F739 1
-

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.