Blue-Grip LL-301

Maximum comfort for long-term work in aggressive environments

  • Freedom of movement, due to the anatomical shape and excellent comfort from the seamless textile support
  • Good tear-resistance
  • Good resistance to many diluted acids and bases

Applications

  • Aeronautics industry
    • Work with composite materials (resins)
  • Food industry
    • Handling frozen products
    • Oyster farming
    • Preparation and packaging
  • Glass industry
    • Handling glass sheets

Product details

  • Cat. 2
  • Mechanical hazards EN 388
    3141
  • Low Chemical Protection EN 374
  • Heat and fire EN 407
    X1XXXX
Material Natural latex
Colour Blue
Interior Finish Textile support
Exterior Finish Non-slip grip
Length (inches) 12"-13" (depending on size)
Thickness (inches) 0.045 (Hvy. Wt.)
Size 6 S 7 M 8 L 9 XL
Packaging 1 pair/bag
48 pairs/carton

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at the workplace may differ from the "CE"-type tests.
  • It is not recommended for persons sensitized to natural latex, dithiocarbamates and thiazoles to use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the MAPA Technical Customer Service (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from direct sunlight, far from heat sources or electric equipment.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with a solvent (alcohol, etc...) : rub over with a dry cloth
  • in use with detergents, acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth

Caution : inappropriate usage of the gloves or submitting them to a cleaning or laundering process which is not specifically recommended, can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

  • This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.
  • This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation

Choose the type of documents you want
Send or download the documentation

You can either send the documentation to an e-mail address, or download it.

An email containing the selected documentation will be sent

If your selection includes more than one document, a ZIP archive containing the documentation will be created.

Chemical chart

Chemical Product CAS # BTT
(minutes)
Permeation
level
Standard Degradation
level
Rating
1,1,1,2-Tetrafluoroethane (HFC-134A) freon 134A 99% 811-97-2 51 2 ASTM F739 NT
NA
Acetone 99% 67-64-1 9 0 EN 374-3:2003 NT
NA
Diethylamine 98% 109-89-7 4 0 ASTM F739 1
-
Dimethylformamide 99% 68-12-2 31 2 ASTM F739 4
+
Freon 114 99% 76-14-2 78 3 ASTM F739 NT
NA
Freon 124 99% 2837-89-0 41 2 ASTM F739 NT
NA
Freon 152A 99% 75-37-6 9 0 ASTM F739 NT
NA
Hydrogen chloride 99% 7647-01-0 117 3 ASTM F739 NT
NA
Hydrogen fluoride Anhydrous 99% 7664-39-3 71 3 ASTM F739 NT
NA
Hydrogen peroxide 30% 7722-84-1 480 6 ASTM F739 NT
NA
Methanol 85% 67-56-1 NT NT 4
NA
Methanol 99% 67-56-1 11 1 ASTM F739 4
+
Sodium hydroxide 20% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 40% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 50% 1310-73-2 480 6 ASTM F739 4
++
Styrene 99% 100-42-5 14 1 ASTM F739 NT
NA
Sulfuric acid 10% 7664-93-9 NT NT 4
NA
Sulfuric acid 40% 7664-93-9 NT NT 4
NA
Sulfuric acid 50% 7664-93-9 NT NT 4
NA
Sulfuric acid 96% 7664-93-9 30 1 ASTM F739 2
=
Tetrachloroethylene (Perchloroethylene) 99% 127-18-4 11 1 ASTM F739 1
-
Vinyl Chloride 99% 75-01-4 11 1 ASTM F739 NT
NA

*not normalized result

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT : Not tested

NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion, puncture and snag resistance, or glove grip also need to be considered in making your final selection.