Telsol 361 - packshot

Telsol 361

Long-lasting mechanical protection against low risk of chemical hazards

Chemical Protection

Specific advantages

  • Longer service life: good abrasion resistance
  • Embossed texture, providing excellent grip
  • Seamless liner for an optimal comfort

Applications

Petrochemical industry

  • Maintenance and handling

Other industries

  • Cleaning and general maintenance in wet environments

Chemical industry

  • Handling drums of chemical products

Standards

  • Cat. 3
  • Mechanical hazards EN 3884141X
  • Type BSpecific Chemical Protection EN 374KMO

Product detail

MaterialPVC
ColourGreen
Interior FinishTextile support
Exterior FinishPebbled
Length (cm)35
Thickness (mm)1.20
Size9 10
Packaging5 pairs
50 pairs/box

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from humidity and heat.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
  • in use with acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth
    Caution : improper use of the gloves or submitting them to a cleaning or laundering process which is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Chemical chart

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of colors :

Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT : Not tested
NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical ProductCAS #Breakthrough time
(minutes)
Permeation
level
StandardDegradation
level
Rating
Ammonium hydroxide solution 25%1336-21-6362EN 16523-1:20154
+
Ethanol 95%64-17-5983EN 374-3:2003NT
Formaldehyde 37%50-00-04806EN 16523-1:2015NT
Hydrochloric acid 10%7647-01-04806EN 374-3:2003NT
Hydrogen peroxide 30%7722-84-14806EN 16523-1:2015NT
Kerosene mixture8008-20-64445EN 374-3:2003NT
Methanol 99%67-56-1291EN 374-3:2003NT
Methyl Ethyl Ketone (2-Butanone) 99%78-93-380EN 374-3:2003NT
n-Heptane 99%142-82-5372EN 374-3:2003NT
Nitric acid 65%7697-37-2853EN 16523-1:20154
++
Sodium hydroxide 20%1310-73-24806EN 374-3:2003NT
Sodium hydroxide 40%1310-73-24806EN 374-3:20034
++
Sodium hydroxide 50%1310-73-24806EN 374-3:2003NT
Sulfuric acid 96%7664-93-91474EN 374-3:2003NT
Toluene 99%108-88-3151EN 374-3:2003NT

*not normalized result

More gloves

Ultranitril 492 - packshot
Chemical Protection

Ultranitril 492

Good mechanical resistance and long-lasting chemical protection

Alto 298 - packshot
Chemical Protection

Alto 298

Good mechanical performance for long-lasting chemical protection

Butoflex 651 - packshot
Chemical Protection

Butoflex 651

Ultimate specific chemical resistance

To contact us

If you would like to ask us a commercial question about our products or if you would like to have more technical information about our gloves and their use, please fill out one of the forms proposed below.