KryTech 531

High cut protection with optimal comfort, breathability and durability

Cut Protection

Specific advantages

  • Breathable coating to have better comfort in use
  • High cut protection for safety work
  • Anatomical shape: close fit for precision
  • Durable for a long-wear.
  • OEKO-TEX®

Applications

Automotive/mechanical industry

  • Automotive assembly
  • Bodywork assembly
  • Finishing sharp parts
  • Handling sheet metal
  • Machine tool manufacture
  • Mechanical maintenance
  • Assembly of thin metal sheets

Mechanical industry

  • Handling sharp sheet metal

Other industries

  • Machine maintenance
  • Handling of « aggressive » parts
  • Household waste collection

Plastics industry

  • Post-injection material removal

Local Authorities (Technical Maintenance)

  • Maintenance work with risk of cuts

Standards

  • Cat. 2
  • Mechanical hazards EN 3884X42C
  • ISO 13997:
    14N (1427g)

Product detail

MaterialWater-based polymer
ColourGreen
Interior FinishSeamless textile support from HDPE fibres
Exterior FinishVentilated back
Length (cm)23 - 27
Thickness (mm)
Size7 8 9 10 11
Packaging1 pair/bag
12 pairs/bag
48 pairs/carton

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use in the workplace may differ from the tests performed in the laboratory.
    It is not recommended for persons sensitised to natural latex( wrist with elastic natural rubber)
    It is not recommended to use this glove next to moving machinery.
  • Put the gloves on dry, clean hands.
  • Ensure the insides of the gloves are dry before putting them on again.

Storage conditions

Store the gloves in their original packaging protected from heat, light and
humidity

Laundering conditions

Performances of the gloves are guaranteed after 1 cleaning cycle under the conditions described above:
Washing condition as per standard ISO6330-2012 : conditions 4M as per appendix [typeA].
Improper use of the gloves or submitting them to a cleaning or laundering process that is not specifically recommended can alter their performance levels.

Drying conditions

Drying at ambient air as per standard ISO6330-2012 ( Procedure C)
Put the gloves on dry, clean hands. Ensure the inside of the gloves is dry before putting them on again.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

More gloves

KryTech 583 - packshotNew
Cut Protection

KryTech 583

Suppleness & breathability without compromise on protection & durability

KryTech 601 - packshotNew
Cut Protection

KryTech 601

Especially designed for quality car inspection in automotive industries

KryTech 599 - packshot
Cut Protection

KryTech 599

Cut, Grip and Skin Protection up to knuckle in oily environments. Unbeatable fingertip sensitivity.

To contact us

If you would like to ask us a commercial question about our products or if you would like to have more technical information about our gloves and their use, please fill out one of the forms proposed below.