KryTech 601 - packshot

KryTech 601

Especially designed for quality car inspection in automotive industries

Cut Protection

Specific advantages

  • A high dexterity coupled with a good cut performance
  • Color adapted to dirty environements for a prolonged durability.
  • Ambidextrous
  • All performances are guaranteed after one washing cycle at 40°C
  • OEKO-TEX® certified to guarantee the absolute protection of the health of the workers

Applications

Automotive/mechanical industry

  • Finishing work

Plastics industry

  • Post-injection material removal

Standards

  • Cat. 2
  • Mechanical hazards EN 3881X4XC
  • ISO 13997:
    14.2N (1448g)

Product detail

Material
ColourGrey
Interior FinishSeamless textile support from HDPE fibres
Exterior Finish
Length (cm)23 to 28
Thickness (mm)
Size7 8 9 10 11
Packaging12 pairs/bag
48 pairs/carton

Operating instructions

Instructions for use

It is recommended to check that the gloves are suitable for the intended use, because the conditions of use in the workplace may differ from the tests performed in the laboratory.
It is not recommended for persons sensitised to natural latex( wrist with elastic natural rubber)
It is not recommended to use this glove next to moving machinery.

  • Put the gloves on dry, clean hands.
  • Ensure the insides of the gloves are dry before putting them on again.

Storage conditions

Store the gloves in their original packaging protected from heat, light and
humidity

Laundering conditions

Performances of the gloves are guaranteed after 1 cleaning cycle under the conditions described above:
Washing condition as per standard ISO6330-2012 : conditions 4M as per appendix [typeA].
Improper use of the gloves or submitting them to a cleaning or laundering process that is not specifically recommended can alter their
performance levels.

Drying conditions

Drying at ambient air according standard ISO6330-2012 (procedure C)
Put the gloves on dry, clean hands. Ensure the inside of the gloves is dry before putting them on again.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

More gloves

KryTech 511 - packshotNew
Cut Protection

KryTech 511

Cut protection with optimal comfort, breathability and durability

KryTech 579 - packshot
Cut Protection

KryTech 579

Standard protection for intricate handling in reasonably clean environments

KryTech 563 - packshot
Cut Protection

KryTech 563

Standard protection for intricate handling in dry and dirty environments

To contact us

If you would like to ask us a commercial question about our products or if you would like to have more technical information about our gloves and their use, please fill out one of the forms proposed below.