Alto 415 - packshot

Alto 415

Fine touch for light chemical protection

Chemical Protection

Specific advantages

  • Tactile sensitivity, due to the gloves reduced thickness
  • Comfort and perspiration absorption, due to the cotton flock-lining
  • Good grip, due to the non-slip embossing
  • Previous name: Techni-Mix 415

Applications

Automotive/mechanical industry

  • Spray-painting

Other industries

  • Industrial cleaning, maintenance

Aeronautics industry

  • Work with composite materials (resins)

Standards

  • Cat. 3
  • Mechanical hazards EN 3881011X
  • Type BSpecific Chemical Protection EN 374KMT
  • Micro-organisms EN 374
  • Radio-active contamination EN 421

Product detail

MaterialNeoprene and natural latex
ColourBlack
Interior FinishFlocked
Exterior FinishEmbossed texture
Length (cm)32
Thickness (mm)0.60
Size6 7 8 9 10 11
Packaging1 pair/bag
10 pairs/bag
100 pairs/carton

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • It is not recommended for persons sensitized to natural latex, dithiocarbamates and thiazoles to use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from direct sunlight, far from heat sources or electric equipment.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with a solvent (alcohols, etc...) : rub over with a dry cloth
  • in use with acids or alkalines : thoroughly rinse the gloves under running water, and rub over with a dry cloth
    Caution : improper use of the gloves or submitting them to a cleaning or laundering process that is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Chemical chart

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of colors :

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT : Not tested
NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical ProductCAS #Breakthrough time (BTT)
(minutes)
Permeation
level
StandardDegradation
level
Rating
Formaldehyde 37%50-00-0NTNT4
Methanol 99%67-56-1482EN 374-3:2003NT
Nitric acid 65%7697-37-24806EN 16523-1:20154
++
Sodium hydroxide 20%1310-73-24806EN 374-3:2003NT
Sodium hydroxide 40%1310-73-24806EN 16523-1:20154
++
Sodium hydroxide 50%1310-73-24806EN 374-3:2003NT
Sulfuric acid 96%7664-93-91534EN 374-3:2003NT

*not normalized result

More gloves

Ultranitril 475 - packshot
Chemical Protection

Ultranitril 475

Completely liquidproof and very good resistance for food handling

UltraNeo 339 - packshot
Chemical Protection

UltraNeo 339

Comfort and high-level chemical protection

Alto 298 - packshot
Chemical Protection

Alto 298

Good mechanical performance for long-lasting chemical protection

To contact us

If you would like to ask us a commercial question about our products or if you would like to have more technical information about our gloves and their use, please fill out one of the forms proposed below.