UltraNeo 407 - packshot

UltraNeo 407

Ultra-high performance chemical protection

Chemical Protection

Specific advantages

  • Broad chemical resistance (acids, aliphatic solvents, solvent mixtures), increased by the thickness of the material
  • Good grip, due to embossed texture
  • Easy to pull on and off, due to chlorinated interior
  • Previous name: Chem-Ply 407

Specific features

The two neoprene layers superimposed increase the mechanical and chemical resistance. The glove red inner layer ensures that any wear is clearly visible, providing optimal safety for the user.

Applications

Mechanical industry

  • Surface treatment of metals (acids)
  • Etching / degreasing

Chemical industry

  • Site pollution control
  • Handling on alkylation units
  • Handling and transporting drums of chemical products

Standards

  • Cat. 3
  • Mechanical hazards EN 3882111X
  • Type ASpecific Chemical Protection EN 374ABCJLMNS
  • Micro-organisms EN 374

Product detail

MaterialNeoprene
ColourBlack
Interior FinishChlorinated
Exterior FinishEmbossed texture
Length (cm)35.5
Thickness (mm)0.75
Size9 10
Packaging1 pair/bag
6 pairs/bag
48 pairs/carton

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • It is not recommended for persons sensitized to dithiocarbamates to use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.

Storage conditions

Store the gloves in their original packaging at a temperature not below 5°C.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
  • in use with a solvent (diluents, etc...) : rub over with a dry cloth
  • in use with acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth

Caution : using the gloves or submitting them to cleaning or laundering process which are not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Chemical chart

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of colors :

Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT : Not tested
NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical ProductCAS #Breakthrough time
(minutes)
Permeation
level
StandardDegradation
level
Rating
1,1,1-Trichloroethane 99%71-55-6562ASTM F7391
-
1,1,1,2-Tetrafluoroethane (HFC-134A) freon 134A 99%811-97-24806ASTM F739NT
1,1,2-Trichlorotrifluoroethane (Freon TF or Freon 113) 99%76-13-14806ASTM F7394
++
1,1,2,2-Tetrachloroethane 98%79-34-5522ASTM F7391
-
1,2 - dichloroethane 99%107-06-2231ASTM F7391
-
1,2-Dichlorobenzene 99%95-50-1492ASTM F7391
-
1,2,4-Trichlorobenzene 99%120-82-11424ASTM F7392
+
1,3 - Dichlorobenzene 98%541-73-1422ASTM F7391
-
2-Butoxyethanol (Butyl Cellusolve) 99%111-76-24806ASTM F7394
++
2-Chlorotoluene (o-Chlorotoluene) 99%95-49-8362ASTM F7391
-
2-Ethoxyethanol (Cellosolve) 99%110-80-54806ASTM F7394
++
2-Ethoxyethyl acetate (Cellosolve Acetate) 99%111-15-91274ASTM F7394
++
2-Methylpentamethylenediamine 99%15520-10-23415ASTM F739NT
2-Propanol (Isopropanol) 99%67-63-04806ASTM F7394
++
2,2,2-Trifluoroethanol 99%75-89-84806ASTM F7394
++
4-Chlorotoluene (p-Chlorotoluene) 98%106-43-4241ASTM F7391
-
Acetaldehyde 99%75-07-0392ASTM F7394
+
Acetic acid 10%64-19-74806ASTM F7394
++
Acetic acid 50%64-19-74806ASTM F7394
++
Acetic acid 99%64-19-74806ASTM F7394
++
Acetone 99%67-64-1362ASTM F7392
=
Acetonitrile 99%75-05-81434ASTM F7394
++
Acrylonitrile 99%107-13-11093ASTM F7394
++
Ammonium hydroxide solution 29%1336-21-64806ASTM F7394
++
Aniline 99%62-53-34155ASTM F7394
++
Benzene 99%71-43-2211ASTM F7391
-
Butyl Acetate 99%123-86-4452ASTM F7393
+
Carbon disulfide 99%75-15-080ASTM F7391
-
Carbon Tetrachloride 99%56-23-5562ASTM F7391
-
Chlorobenzene 99%108-90-7281ASTM F7391
-
Chloroform 99%67-66-3131ASTM F7391
-
Chromic Acid 50%7738-94-54806ASTM F7394
++
Cumene 98%98-82-8663ASTM F7393
++
Cyclohexane 99%110-82-71844ASTM F7394
++
Dichloromethane (Methylene Chloride) 99%75-09-2121ASTM F7391
-
Diethanolamine 97%111-42-24806ASTM F7394
++
Dimethylformamide 99%68-12-22174ASTM F7394
++
Dimethylsulfoxide 99%67-68-54806ASTM F7394
++
Ethanol 95%64-17-54806ASTM F7394
++
Ether (Diethyl Ether) 99%60-29-7281ASTM F7393
=
Ethyl acetate 99%141-78-6372ASTM F7393
+
Ethylene glycol 99%107-21-14806ASTM F7394
++
Ethylene oxide 99%75-21-8452ASTM F739NT
Formaldehyde 37%50-00-04806ASTM F7394
++
Freon 12 99%75-71-84806ASTM F739NT
Furfural 99%98-01-12585ASTM F7394
++
Hydrazine 35%302-01-24806ASTM F7394
++
Hydrazine 70%302-01-24806ASTM F7394
++
Hydrazine 98%302-01-2NTNT4
Hydrochloric acid 10%7647-01-04806ASTM F7394
++
Hydrochloric acid 35%7647-01-04806EN 374-3:20034
++
Hydrochloric acid 37%7647-01-04806ASTM F7394
++
Hydrofluoric Acid 10%7664-39-34806ASTM F7394
++
Hydrofluoric Acid 40%7664-39-34806EN 16523-1:2015NT
Hydrofluoric Acid 49%7664-39-34806ASTM F7394
++
Hydrogen fluoride Anhydrous 100% Liq.7664-39-32404EN 374-3:1994NT
Hydrogen fluoride Anhydrous 99% Gas7664-39-34806ASTM F739NT
Hydrogen peroxide 30%7722-84-14806EN 16523-1:2015NT
Iodomethane (Methyl Iodide) 99%74-88-490ASTM F739NT
Isoamyl Acetate (Isopentylacetate) 98%123-92-21224ASTM F7393
++
Isobutyl alcohol 99%78-83-14806ASTM F7394
++
Kerosene mixture8008-20-64806ASTM F7394
++
m-Cresol 97%108-39-44806ASTM F7394
++
Methanol 85%67-56-1NTNT4
Methanol 99%67-56-12455ASTM F7394
++
Methyl Amyl Ketone 98%110-43-0522ASTM F7393
+
Methyl Ethyl Ketone (2-Butanone) 99%78-93-3251ASTM F7393
=
Methylisobutylketone 99%108-10-1633ASTM F7393
++
Mineral Spirits 100%64475-85-0NTNT4
n-Heptane 99%142-82-51864ASTM F7394
++
n-hexane 95%110-54-31324ASTM F7394
++
N-methyl-2-Pyrrolidone 99%872-50-42264ASTM F7393
++
N-N dimethyl acetamide 30%127-19-5NTNT4
N-N dimethyl acetamide 99%127-19-5923ASTM F7394
++
Naphtha mixture8030-30-6NTNT4
Naphtha Heavy mixture68551-17-74806ASTM F739NT
Naphtha VM&P mixture8032-32-4893ASTM F7394
++
Naphtha, Hydrodesulphurized Heavy mixture64742-82-13925EN 374-3:20032
+
Naphtha, Hydrotreated Heavy mixture64742-48-93705EN 374-3:2003NT
Nitric acid 10%7697-37-24806ASTM F7394
++
Nitric acid 20%7697-37-24806ASTM F7394
++
Nitric acid 40%7697-37-24806ASTM F7394
++
Nitric acid 50%7697-37-24806ASTM F7394
++
Nitric acid 65%7697-37-24806EN 16523-1:20154
++
Nitric acid 68%7697-37-24806EN 374-3:20033
++
Nitric acid 90%7697-37-290ASTM F739NT
Nitrobenzene 99%98-95-31324ASTM F7393
++
Oleic Acid 90%112-80-1NTNT4
p-dioxane (1,4-Dioxane) 99%123-91-1743ASTM F739NT
Pentane 99%109-66-01224ASTM F7394
++
Pentane isomers mixtureNA1614EN 374-3:2003NT
Phenol 85%108-95-24806ASTM F7394
++
Phosphoric acid 75%7664-38-24806ASTM F7394
++
Phosphoric acid 85%7664-38-24806ASTM F7394
++
Polychlorinated Biphenyl (PCB) (50%) in 1,2,4-Trichlorobenzene mixture11097-69-11614ASTM F739NT
Potassium Hydroxide 50%1310-58-34806ASTM F7394
++
Pyridine 99%110-86-1362ASTM F7392
=
Sodium hydroxide 20%1310-73-24806ASTM F7394
++
Sodium hydroxide 40%1310-73-24806ASTM F7394
++
Sodium hydroxide 50%1310-73-24806ASTM F7394
++
Styrene 99%100-42-5201EN 374-3:20031
-
Sulfuric acid 10%7664-93-94806ASTM F7394
++
Sulfuric acid 40%7664-93-94806ASTM F7394
++
Sulfuric acid 50%7664-93-94806ASTM F7394
++
Sulfuric acid 96%7664-93-94806ASTM F7394
++
Tetrachloroethylene (Perchloroethylene) 99%127-18-4402ASTM F7391
-
Tetrahydrofurane 99%109-99-9NTNT1
Toluene 99%108-88-3191ASTM F7391
-
Toluene Diisocyanate (TDI) 80%584-84-94806ASTM F7394
++
Trichloroethylene 99%79-01-6121ASTM F7391
-
Triethanolamine 98%102-71-64806ASTM F7394
++
Triethylamine 99%121-44-81334ASTM F739NT
Turpentine mixture8006-64-24806ASTM F7394
++
Unleaded gasoline mixture8006-61-9412ASTM F7392
=
Vinyl acetate 99%108-05-4382ASTM F7394
+
Xylene 99%1330-20-7241ASTM F7391
-

*not normalized result

More gloves

UltraNeo 420 - packshot
Chemical Protection

UltraNeo 420

Extremely supple with freedom of movement for standard chemical protection

UltraNeo 341 - packshotNew
Chemical Protection

UltraNeo 341

Comfort with standard chemical protection

UltraNeo 339 - packshot
Chemical Protection

UltraNeo 339

Comfort and high-level chemical protection

To contact us

If you would like to ask us a commercial question about our products or if you would like to have more technical information about our gloves and their use, please fill out one of the forms proposed below.