Ultranitril 491 - packshot

Ultranitril 491

Good mechanical resistance and long-lasting chemical protection

Chemical Protection

Specific advantages

  • Dexterity and comfort, due to the anatomical shape and the quality of the flock-lining
  • Longer service life: excellent mechanical resistance (abrasion, perforation)

Applications

Automotive/mechanical industry

  • Machining parts using cutting oil
  • Treating/degreasing metals with solvents

Chemical industry

  • Manufacture and application of paints and varnishes

Other industries

  • Application of pesticides
  • Cleaning of printing-press rollers
  • Maintenance
  • Timber treatment and finishing

Agriculture sector

  • Application & spreading of pesticides
  • Pesticides waste management
  • Spray mixtures preparation
  • Tank filling
  • Pesticides handling
  • Treatment equipment cleaning

Standards

  • Cat. 3
  • Mechanical hazards EN 3883101X
  • Type ASpecific Chemical Protection EN 374AJKOPT
  • Micro-organisms EN 374VIRUS
  • Protection from pesticides ISO 18889 G2

Product detail

MaterialNitrile
ColourGreen
Interior FinishFlocked
Exterior FinishEmbossed texture
Length (cm)36
Thickness (mm)0.38
Size6 7 8 9 10
Packaging10 pair/bag
50 pairs/carton

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • Persons sensitised to dithiocarbamates and thiazoles should not use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from light, humidity and heat.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
  • in use with a solvent (diluents, etc...) : rub over with a dry cloth
  • in use with acids or alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth

Caution : improper use of the gloves or submitting them to any cleaning or laundering process which is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Chemical chart

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of colors :

Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT : Not tested
NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical ProductCAS #Breakthrough time
(minutes)
Permeation
level
StandardDegradation
level
Rating
1,1,1-Trichloroethane 99%71-55-6452EN 374-3:20031
-
2-Butoxyethanol (Butyl Cellusolve) 99%111-76-22364EN 374-3:20033
++
2-Nitropropane 99%79-46-9NTNT1
2-Propanol (Isopropanol) 99%67-63-03605EN 374-3:20033
++
Acetic acid 99%64-19-7472EN 374-3:20031
-
Acetone 99%67-64-130EN 374-3:20031
-
Ammonium hydroxide solution 25%1336-21-61324EN 16523-1:20154
++
Bromine 100%7726-95-6181EN 374-3:2003NT
Bromobenzene 99%108-86-190EN 374-3:2003NT
Butyl Acetate 99%123-86-4251EN 374-3:20031
-
Carbon disulfide 99%75-15-030EN 16523-1:2015NT
Cyclohexane 99%110-82-74806EN 374-3:20034
++
Cyclohexanone 99%108-94-1291EN 374-3:20031
-
Dichloromethane (Methylene Chloride) 99%75-09-210EN 374-3:20031
-
Diethylamine 98%109-89-7171EN 374-3:20031
-
Dimethylformamide 99%68-12-2NTNT1
Dimethylsulfoxide 99%67-68-5472EN 374-3:20031
-
Ethanol 95%64-17-51304EN 374-3:20033
++
Ethylene glycol 99%107-21-1NTNT4
Formaldehyde 37%50-00-04806EN 16523-1:20154
++
Fuel oils mixture68476-34-64806EN 374-3:20034
++
Hydrochloric acid 10%7647-01-0NTNT4
Hydrochloric acid 35%7647-01-0NTNT4
Hydrogen peroxide 30%7722-84-14806EN 16523-1:20153
++
Methanol 99%67-56-1472EN 16523-1:20151
-
Methyl Ethyl Ketone (2-Butanone) 99%78-93-350EN 374-3:20031
-
Methyl methacrylate 95%80-62-6111EN 374-3:20031
-
Methylisobutylketone 99%108-10-1151EN 374-3:20031
-
n-Heptane 99%142-82-54806EN 16523-1:20154
++
N-methyl-2-Pyrrolidone 99%872-50-4352EN 374-3:20031
-
N-N dimethyl acetamide 99%127-19-5100EN 374-3:20031
-
Naphtha, Hydrodesulphurized Heavy mixture64742-82-14806EN 374-3:20034
++
Naphtha, Hydrotreated Heavy mixture64742-48-94806EN 374-3:20034
++
Nitric acid 65%7697-37-2NTNT0
Pentane isomers mixtureNA4806EN 374-3:2003NT
Phosphoric acid 75%7664-38-24806EN 374-3:20034
++
Sodium hydroxide 20%1310-73-24806EN 374-3:20034
++
Sodium hydroxide 40%1310-73-24806EN 16523-1:20154
++
Sodium hydroxide 50%1310-73-24806EN 374-3:20034
++
Styrene 99%100-42-590EN 374-3:20031
-
Sulfuric acid 96%7664-93-9803EN 374-3:20031
-
t-Butyl Methyl Ether 98%1634-04-42404EN 374-3:20033
++
Tetrachloroethylene (Perchloroethylene) 99%127-18-41173EN 374-3:20033
++
Tetrahydrofurane 99%109-99-940EN 374-3:20031
-
Toluene 99%108-88-3161EN 374-3:20031
-
Trichloroethylene 99%79-01-640EN 374-3:20031
-
Unleaded gasoline mixture8006-61-9983EN 374-3:20034
++
Vinyl acetate 99%108-05-490EN 374-3:20031
-
Xylene 99%1330-20-7331EN 374-3:20031
-

*not normalized result

More gloves

UltraNeo 339 - packshot
Chemical Protection

UltraNeo 339

Comfort and high-level chemical protection

UltraNeo 420 - packshot
Chemical Protection

UltraNeo 420

Extremely supple with freedom of movement for standard chemical protection

Telsol 351 - packshot
Chemical Protection

Telsol 351

Comfort, flexibility and mechanical protection with low risk of chemical hazards

To contact us

If you would like to ask us a commercial question about our products or if you would like to have more technical information about our gloves and their use, please fill out one of the forms proposed below.