Solo 997 - packshot

Solo 997

Good protection for handling of small parts in mechanical industry

Disposable

Specific advantages

  • Excellent dexterity thanks to flexibility and reduced material thickness
  • Worn alone or as an outer-glove
  • Recommended for oily environments in industry
  • Previous name: Solo Blue 997

Applications

Automotive/mechanical industry

  • Assembly of small oily parts

Aeronautics industry

  • Work with composite materials (resins)

Laboratory

  • Manufacturing of medicines
  • Pharmaceutical preparation
  • Research, analysis, handling of precision parts

Standards

  • Cat. 3
  • Type BSpecific Chemical Protection EN 374JKT
  • Micro-organisms EN 374VIRUS

Product detail

MaterialNitrile
ColourBlue
Interior FinishChlorinated
Exterior FinishSmooth with pebbled fingertips
Length (cm)24
Thickness (mm)0.1
Size6 7 8 9
Packaging100 gloves/box
1000 gloves/carton

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the «CE»-type tests.
  • It is not recommended to persons sensitized to dithhiocarbamates to use these gloves.
  • Put the gloves on dry, clean hands.
  • These gloves are designed for single use only.
  • Do not touch the external side of the gloves when taking them off. Fold back the cuff end and pull them off while turning them inside out.

Storage conditions

Store the gloves in their original packaging protected from direct sunlight, far from heat sources.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Chemical chart

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of colors :

Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT : Not tested
NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical ProductCAS #Breakthrough time
(minutes)
Permeation
level
StandardDegradation
level
Rating
2-Propanol (Isopropanol) 70%67-63-0953EN 16523-1:2015NT
2-Propanol (Isopropanol) 99%67-63-0301ASTM F7393
=
Acetic acid 50%64-19-7342ASTM F7392
=
Acetic acid 99%64-19-740ASTM F739NT
Acetone 99%67-64-110ASTM F7391
-
Acetonitrile 99%75-05-810ASTM F739NT
Ammonium hydroxide solution 29%1336-21-6131ASTM F7394
+
Amyl Alcohol 99%71-41-0693ASTM F739NT
Carbon Tetrachloride 99%56-23-530ASTM F739NT
Dichloromethane (Methylene Chloride) 99%75-09-200ASTM F7391
-
Diethylamine 98%109-89-710ASTM F739NT
Dimethylsulfoxide 99%67-68-5211ASTM F739NT
Ethanol 70%64-17-5221EN 374-3:2003NT
Ethanol 95%64-17-5111ASTM F739NT
Formaldehyde 37%50-00-0NTNT4
Formic Acid 96%64-18-630ASTM F739NT
Hydrochloric acid 10%7647-01-0NTNT4
Hydrochloric acid 35%7647-01-0532EN 374-3:20034
+
Hydrochloric acid 37%7647-01-0602ASTM F7394
+
Hydrofluoric Acid 10%7664-39-3NTNT4
Hydrofluoric Acid 49%7664-39-3100ASTM F7394
=
Hydrogen peroxide 30%7722-84-14806ASTM F7392
+
Methanol 99%67-56-140ASTM F7393
=
n-Butanol 99%71-36-3412ASTM F739NT
n-Heptane 99%142-82-5623EN 16523-1:20152
+
Naphtha Heavy mixture68551-17-71073ASTM F7394
++
Naphtha VM&P mixture8032-32-4271ASTM F739NT
Nitric acid 50%7697-37-2271ASTM F7391
-
p-dioxane (1,4-Dioxane) 99%123-91-120ASTM F739NT
Phenol 50%108-95-230ASTM F739NT
Phenol 85%108-95-2NTNT1
Phosphoric acid 75%7664-38-24806ASTM F7394
++
Phosphoric acid 85%7664-38-24806ASTM F7394
++
Sodium hydroxide 20%1310-73-24806ASTM F7394
++
Sodium hydroxide 40%1310-73-24806ASTM F7392
+
Sodium hydroxide 50%1310-73-24806ASTM F7394
++
Sodium Hypochlorite 5%10022-70-54806ASTM F739NT
Sulfuric acid 10%7664-93-94806ASTM F7394
++
Sulfuric acid 40%7664-93-94806ASTM F7394
++
Sulfuric acid 50%7664-93-94806ASTM F7394
++
Toluene 99%108-88-310ASTM F7391
-
Unleaded gasoline mixture8006-61-940ASTM F739NT
Xylene 99%1330-20-720ASTM F7391
-

*not normalized result

More gloves

Solo 998 - packshot
Disposable

Solo 998

Optimal flexibility and dexterity

Solo Plus 995 - packshot
Disposable

Solo Plus 995

Optimal flexibility and dexterity

Solo 999 - packshot
Disposable

Solo 999

Excellent mechanical resistance, ideal in oily environments

To contact us

If you would like to ask us a commercial question about our products or if you would like to have more technical information about our gloves and their use, please fill out one of the forms proposed below.