Vital 124 - packshot

Vital 124

Precision dexterity in non-agressive environments

Liquidproof Protection

Specific advantages

  • Excellent dexterity from the suppleness of natural latex
  • Good resistance
  • Comfortable cotton flock-lining

Applications

Mechanical industry

  • Assembly of small, oil and grease free parts

Food industry

  • Common cleaning Tasks

Local Authorities (Cleaning)

  • Handling household detergents

Standards

  • Cat. 3
  • Mechanical hazards EN 3880010X
  • Type BSpecific Chemical Protection EN 374KPT
  • Micro-organisms EN 374
  • Radio-active contamination EN 421

Product detail

MaterialNatural latex
ColourYellow
Interior FinishFlocked
Exterior FinishEmbossed texture
Length (cm)30.5
Thickness (mm)0.35
Size6 7 8 9 10
Packaging1 pair/bag
10 pairs/bag
100 pairs/carton

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
  • It is not recommended for persons sensitised to natural latex, dithiocarbamates and thiazoles to use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from direct sunlight, far from heat sources or electric equipment.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in contact with a solvent (alcohol, etc...) : rub over with a dry cloth.
  • in contact with acids or alkalies: thoroughly rinse the gloves under running water, and rub over with a dry cloth.
    Caution : improper use of the gloves or submitting them to a cleaning or laundering process that is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Chemical chart

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of colors :

Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT : Not tested
NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical ProductCAS #Breakthrough time
(minutes)
Permeation
level
StandardDegradation
level
Rating
2-Butoxyethanol (Butyl Cellusolve) 99%111-76-2211ASTM F7394
+
2-Ethoxyethanol (Cellosolve) 99%110-80-5271ASTM F7394
+
2-Ethoxyethyl acetate (Cellosolve Acetate) 99%111-15-9151ASTM F7393
=
2-Propanol (Isopropanol) 99%67-63-0362ASTM F7394
+
Acetaldehyde 99%75-07-050ASTM F7394
=
Acetic acid 10%64-19-7NTNT4
Acetic acid 50%64-19-72545ASTM F7394
++
Acetic acid 99%64-19-7342ASTM F7394
+
Acetone 99%67-64-170ASTM F7393
=
Ammonium hydroxide solution 29%1336-21-6161ASTM F7394
+
Aniline 99%62-53-3673ASTM F7394
++
Dimethylformamide 99%68-12-2482ASTM F7394
+
Dimethylsulfoxide 99%67-68-52164ASTM F7394
++
Ethanol 95%64-17-5211ASTM F7394
+
Ethylene glycol 99%107-21-14806ASTM F7394
++
Formaldehyde 30%50-00-0NTNT4
Formaldehyde 37%50-00-04806ASTM F7394
++
Glutaraldehyde 50%111-30-8NTNT4
Hydrazine 35%302-01-2NTNT4
Hydrazine 70%302-01-21153ASTM F7394
++
Hydrazine 98%302-01-2NTNT4
Hydrochloric acid 10%7647-01-04806EN 374-3:20034
++
Hydrochloric acid 35%7647-01-04806EN 374-3:20034
++
Hydrochloric acid 37%7647-01-0432ASTM F7394
+
Hydrogen peroxide 30%7722-84-14806EN 16523-1:20154
++
m-Cresol 97%108-39-41454ASTM F7394
++
Methanol 85%67-56-1NTNT4
Methanol 99%67-56-1201ASTM F7394
+
Methyl Ethyl Ketone (2-Butanone) 99%78-93-360ASTM F7392
-
N-methyl-2-Pyrrolidone 99%872-50-4171EN 374-3:20034
+
N-N dimethyl acetamide 30%127-19-5NTNT4
N-N dimethyl acetamide 99%127-19-5392ASTM F7394
+
Nitric acid 10%7697-37-24806ASTM F7394
++
Nitric acid 20%7697-37-24806ASTM F7394
++
Nitric acid 40%7697-37-24806ASTM F7394
++
Nitric acid 50%7697-37-24806ASTM F7394
++
Phenol 85%108-95-2773ASTM F7394
++
Phosphoric acid 75%7664-38-24806ASTM F7394
++
Phosphoric acid 85%7664-38-24806ASTM F7394
++
Potassium Hydroxide 50%1310-58-34806ASTM F7394
++
Skydrol LD-4 mixtureNA602ASTM F739NT
Sodium hydroxide 20%1310-73-24806ASTM F7394
++
Sodium hydroxide 40%1310-73-24806ASTM F7394
++
Sodium hydroxide 50%1310-73-24806ASTM F7394
++
Styrene 99%100-42-510EN 374-3:2003NT
Sulfuric acid 10%7664-93-94806ASTM F7394
++
Sulfuric acid 40%7664-93-94806ASTM F7394
++
Sulfuric acid 50%7664-93-94806ASTM F7394
++
Toluene Diisocyanate (TDI) 80%584-84-94806ASTM F7393
++
Triethanolamine 98%102-71-64806ASTM F7394
++

*not normalized result

More gloves

Alto 405 - packshot
Liquidproof Protection

Alto 405

Fine touch for light chemical protection

Jersette 308 - packshot
Liquidproof Protection

Jersette 308

Good comfort for long-term work for food handling

Vital 115 - packshot
Liquidproof Protection

Vital 115

Precision dexterity in non-agressive environments

To contact us

If you would like to ask us a commercial question about our products or if you would like to have more technical information about our gloves and their use, please fill out one of the forms proposed below.