Alto 298 - packshot

Alto 298

Good mechanical performance for long-lasting chemical protection

Chemical Protection

Specific advantages

  • A long cuff for a better protection of the forearm
  • Longer service life and good impact protection, due to the thickness of the material
  • Silicone free to prevent traces, defects on metal sheet and glass prior to painting


Other industries

  • Pharmaceutical industry
  • Maintenance in wet environments

Mechanical industry

  • Maintenance in wet environments (water, oil, greases, hydrocarbons)


  • CAT. 3Cat. 30334
  • Mechanical hazards EN 3883131X
  • Type ASpecific Chemical Protection EN 374AKLMPT
  • Micro-organisms EN 374

Product detail

MaterialNatural latex
Interior FinishChlorinated
Exterior FinishSmooth
Length (cm)42
Thickness (mm)1.00
Size8 9 10
Packaging1 pair/bag
5 pairs/bag
50 pairs/carton

Chemical chart

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of colors :

Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT : Not tested
NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical ProductCAS #Breakthrough time
2-Propanol (Isopropanol) 99%67-63-01824EN 374-3:2003NT
Acetone 99%67-64-1341EN 16523-1:2015NT
Butyl Acetate 99%123-86-4332EN 374-3:2003NT
Cyclohexane 99%110-82-7342EN 374-3:2003NT
Dimethylformamide 99%68-12-21404EN 374-3:2003NT
Ethanol 95%64-17-51103EN 374-3:2003NT
Formaldehyde 37%50-00-04806EN 16523-1:20154
Hydrochloric acid 10%7647-01-04806EN 374-3:2003NT
Hydrochloric acid 35%7647-01-04806EN 374-3:2003NT
Hydrogen peroxide 30%7722-84-14806EN 16523-1:20154
Methanol 99%67-56-11874EN 16523-1:20153
Methyl Ethyl Ketone (2-Butanone) 99%78-93-3261EN 374-3:2003NT
Nitric acid 65%7697-37-2NTNT3
Sodium hydroxide 20%1310-73-24806EN 374-3:2003NT
Sodium hydroxide 40%1310-73-24806EN 16523-1:20154
Sodium hydroxide 50%1310-73-24806EN 374-3:2003NT
Sulfuric acid 10%7664-93-94806EN 374-3:2003NT
Sulfuric acid 40%7664-93-94806EN 374-3:2003NT
Sulfuric acid 50%7664-93-94806EN 374-3:2003NT
Sulfuric acid 96%7664-93-94806EN 374-3:20033
Toluene 99%108-88-3141EN 374-3:2003NT
Xylene 99%1330-20-7141EN 374-3:2003NT

*not normalized result

More gloves

Butoflex 651 - packshot
Chemical Protection

Butoflex 651

Ultimate specific chemical resistance

Ultranitril 493 - packshot
Chemical Protection

Ultranitril 493

Ultra-long chemical protection

UltraNeo 420
Chemical Protection

UltraNeo 420

Extremely supple with freedom of movement for standard chemical protection

To contact us

If you would like to ask us a commercial question about our products or if you would like to have more technical information about our gloves and their use, please fill out one of the forms proposed below.