Butoflex 650 - packshot

Butoflex 650

Ultimate specific chemical resistance

Chemical Protection

Specific advantages

  • Exceptional comfort; the first butyl glove on the market with a fabric inner lining
  • Ultimate specific chemical resistance, for very corrosive acids, ketones, esters and amine derivatives
  • Unrivaled flexibility and dexterity

Specific features

The only Butyl glove on the market with an exclusive embossed
exterior finish, meaning slippery objects can be handled without risk.

Applications

Cosmetics and Pharmaceutical industry

  • Handling in laboratories

Mechanical industry

  • Metal treatment and degreasing

Chemical industry

  • Sampling chemicals
  • Handling and repackaging chemicals
  • Formulating paints, varnishes, resins and inks

Standards

  • Cat. 3
  • Mechanical hazards EN 3881121X
  • Type ASpecific Chemical Protection EN 374ABCILMNOS
  • Micro-organisms EN 374

Product detail

MaterialButyl
ColourBlack
Interior FinishTextile support Mapa Technology
Exterior FinishEmbossed texture
Length (cm)35
Thickness (mm)1.5
Size7 8 9 10 11
Packaging1 pair/bag
6 pairs/carton

Operating instructions

Instructions for use

  • It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the “CE”-type tests.
  • Persons sensitized to thiurames and thiazoles should not use these gloves.
  • Put the gloves on dry, clean hands.
  • Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Mapa Technical Customer Service - (stc.mapaspontex@mapaspontex.fr) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
  • Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
  • Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from humidity, heat, at mini 5°C (41°F).

Laundering conditions

Before taking off the gloves, clean them as appropriate :

  • in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
  • in use with a solvent (diluents, etc…) : rub over with a dry cloth
  • in use with acids and alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth.

Caution : improper use of the gloves or submitting them to any cleaning or laundering process which is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before reusing them.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Chemical chart

Overall Chemical Protection Rating

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of colors :

Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT : Not tested
NA : Not applicable because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical ProductCAS #Breakthrough time (BTT)
(minutes)
Permeation
level
StandardDegradation
level
Rating
2-Propanol (Isopropanol) 99%67-63-04806EN 374-3:20034
++
Acetic acid 10%64-19-74806EN 374-3:20034
++
Acetic acid 50%64-19-74806EN 374-3:20034
++
Acetic acid 99%64-19-74806EN 16523-1:20154
++
Acetone 99%67-64-14806EN 16523-1:20154
++
Acetonitrile 99%75-05-84806EN 374-3:20034
++
Acrylic acid 95%79-10-74806EN 374-3:20034
++
Acrylic acid 99%79-10-74806EN 374-3:20034
++
Ammonia 99%7664-41-74806EN 374-3:2003NT
Ammonium hydroxide solution 25%1336-21-64806EN 16523-1:20154
++
Carbon disulfide 99%75-15-010EN 374-3:20034
=
Chlorine 100%7782-50-54806EN 374-3:2003NT
Dichloromethane (Methylene Chloride) 99%75-09-2121EN 374-3:20032
=
Diethylamine 98%109-89-7111EN 374-3:20032
=
Dimethylformamide 99%68-12-24806EN 374-3:20034
++
Ethanol 95%64-17-54806EN 374-3:20034
++
Ethyl acetate 99%141-78-61584EN 16523-1:20154
++
Ethyl methacrylate 99%97-63-2813ASTM F739NT
Formaldehyde 37%50-00-04806EN 16523-1:2015NT
Formic Acid 100%64-18-6NTNT4
Formic Acid 96%64-18-6NTNT4
Hydrochloric acid 10%7647-01-0NTNT4
Hydrochloric acid 35%7647-01-0NTNT4
Hydrochloric acid 37%7647-01-0NTNT4
Hydrofluoric Acid 10%7664-39-34806EN 374-3:2003NT
Hydrofluoric Acid 40%7664-39-34806EN 16523-1:2015NT
Hydrofluoric Acid 49%7664-39-34806EN 374-3:2003NT
Hydrogen bromide 100%10035-10-6NTNT4
Hydrogen bromide 47%10035-10-6NTNT4
Hydrogen chloride 99%7647-01-04806EN 374-3:2003NT
Hydrogen fluoride Anhydrous 100% Liq.7664-39-340EN 16523-1:2015NT
Hydrogen peroxide 30%7722-84-14806EN 16523-1:2015NT
Isobutyl methacrylate 97%97-86-91053ASTM F739NT
Methanol 85%67-56-14806EN 374-3:20034
++
Methanol 99%67-56-14806EN 374-3:20034
++
Methyl acetate 99%79-20-92734ASTM F739NT
Methyl Ethyl Ketone (2-Butanone) 99%78-93-34806EN 374-3:20034
++
Methyl methacrylate 95%80-62-6NTNT4
Methyl methacrylate 99%80-62-6893EN 374-3:20034
++
n-butyl methacrylate 99%97-88-1903ASTM F739NT
n-Heptane 99%142-82-5151EN 374-3:20031
-
N-N dimethyl acetamide 30%127-19-54806ASTM F739NT
N-N dimethyl acetamide 99%127-19-54806ASTM F739NT
Naphtha, Hydrotreated Heavy mixture64742-48-9452EN 374-3:20032
=
Nitric acid 10%7697-37-24806EN 374-3:20034
++
Nitric acid 20%7697-37-24806EN 374-3:20034
++
Nitric acid 40%7697-37-24806EN 374-3:20034
++
Nitric acid 50%7697-37-24806EN 374-3:20034
++
Nitric acid 65%7697-37-24806EN 16523-1:20154
++
Nitric acid 68%7697-37-24806EN 374-3:20034
++
Phosphoric acid 75%7664-38-24806EN 374-3:20034
++
Phosphoric acid 85%7664-38-24806EN 374-3:20034
++
Sodium hydroxide 20%1310-73-24806EN 374-3:20034
++
Sodium hydroxide 40%1310-73-24806EN 374-3:20034
++
Sodium hydroxide 50%1310-73-24806EN 374-3:20034
++
Styrene 99%100-42-5191EN 374-3:20032
=
Sulfuric acid 10%7664-93-94806EN 374-3:2003NT
Sulfuric acid 40%7664-93-94806EN 374-3:2003NT
Sulfuric acid 50%7664-93-94806EN 374-3:2003NT
Sulfuric acid 96%7664-93-94806EN 374-3:20034
++
Tetrahydrofurane 99%109-99-9131EN 374-3:20031
-
Toluene 99%108-88-380EN 374-3:20031
-
Vinyl acetate 99%108-05-42124ASTM F739NT
Xylene 99%1330-20-7100EN 374-3:20031
-

*not normalized result

More gloves

Ultranitril 485 - packshot
Chemical Protection

Ultranitril 485

Good sensitivity for standard chemical protection

Ultranitril 491 - packshot
Chemical Protection

Ultranitril 491

Good mechanical resistance and long-lasting chemical protection

Ultranitril 493 - packshot
Chemical Protection

Ultranitril 493

Ultra-long chemical protection

To contact us

If you would like to ask us a commercial question about our products or if you would like to have more technical information about our gloves and their use, please fill out one of the forms proposed below.