1. www.mapa-pro.com
  2. Our gloves
  3. Cut protection
  4. Precision work
  5. KryTech 610
KryTech 610

Cut protection

KryTech 610

A cut protection with a maximum comfort

  • Category 2 Category 2
  • EN 388 EN 388 4X43C
  • ISO 13997
    14.9 N (1519 g)
  • Oeko-tex
  • Silicone free
  • Washable

Comfort

  • A seamless plaited glove for very good fit, dexterity and flexibility.
  • Optimal breathability

Guaranteed quality

  • Silicone free to prevent traces, defects on metal sheet and glass prior to painting

Washability

  • Washable up to 3 times at 60°C , allowing to extend glove lifespan, reduce costs and waste.

Practical

  • Cut level easy to identify thanks to the marking on the back of the glove.

Care for the environment

  • 8 gr CO₂ of carbon footprint reduction (1)
  • Recycled material in the glove: 8 %
  • Recycled material in the liner: 9 %
  • Optimised individual packaging to limit plastic waste
  • Recycled material in the packaging: 30 %

Construction industry (Construction Industry (Metalworkers/Locksmiths))

  • Installing and repairing locks
  • Handling
  • Handling sheet metal

Automotive industry

  • Handling sheet metal
  • Handling and sorting small, sharp parts

Glass industry

  • Handling glass sheets

Mining industry

  • Maintenance with cut risk
  • Mechanical maintenance

Material Polyurethane
Colour Grey
Interior finish Seamless textile support from HDPE fibres
Exterior finish Ventilated back
Length (cm) 23-28
Sizes 5 6 7 8 9 10 11
Packaging 1 pair/bag, 12 pairs/bag, 48 pairs/carton
Disclaimer glimpact (1) Measurement based on a Life Cycle Assessment (LCA) carried out using EVEA’s ASKOR tool and following the European Product Environmental Footprint (PEF 3.1) methodology adopted by the European Commission, in accordance with ISO 14040 and ISO 14044. Life cycle scope: cradle-to-grave; the use phase was not modelled. The carbon footprint results are based on actual production data collected in 2025, based a pair of cut C polyurethane gloves.
**Life Cycle Analysis (kg CO2eq) 0.77
  1. (1) Measurement based on a Life Cycle Assessment (LCA) carried out using EVEA’s ASKOR tool and following the European Product Environmental Footprint (PEF 3.1) methodology adopted by the European Commission, in accordance with ISO 14040 and ISO 14044. Life cycle scope: cradle-to-grave; the use phase was not modelled. The carbon footprint results are based on actual production data collected in 2025, based a pair of cut C polyurethane gloves.

Do you have a question? Contact us!

If you have a question, need a sample or would like further technical information about our gloves and their use.

Contact us

More gloves

KryTech 809
Cut protection

KryTech 809

Level B cut resistant gloves with crotch reinforcement. Enhanced durability combined with a high suppleness thanks to the HDPE liner. Touchscreen ability.

KryTech 584
Cut protection

KryTech 584

A compromise between dexterity and protection

KryTech 609
Cut protection

KryTech 609

Level B cut resistant gloves. Enhanced durability combined with a high suppleness thanks to the HDPE liner. Touchscreen ability.

Get in touch

If you would like to ask us a commercial question about our products or if you would like to have more technical information about our gloves and their use, please fill out one of the forms proposed below.

Commercial contact Technical contact

Standards

All standards

Documentation

Mapa Professional 2026 Catalog

Online reading
English - 2026 edition
View the 2026 e-catalogue