KryTech 588

Cut,Grip and dexterity for dry and slightly oily environments

Cut Protection

Specific advantages

  • Cut protective and DMF free glove
  • Our nitrile sandy coating ensures an excellent grip in oily environments. It also reduces muscle fatigue and boost your productivity
  • Excellent abrasion resistance due to nitrile coating
  • Long lasting and cost effective: washable until 5 cleaning cycles (see laundering and drying conditions)
  • OEKO-TEX®

Applications

Automotive/mechanical industry

  • Handling sheet metal
  • Handling oily mechanical parts
  • Handling and sorting small, sharp parts

Glass industry

  • Handling glass sheets

Other industries

  • Maintenance

Mechanical industry

  • Maintenance in wet environments (water, oil, greases, hydrocarbons)
  • Cutting and stamping metal

Standards

  • Cat. 2
  • Mechanical hazards EN 3884343B
  • ISO 13997:
    5.9N (601g)

Product detail

MaterialNitrile sandy
ColourBlack
Interior FinishSeamless textile support from HDPE fibres
Exterior FinishVentilated back
Length (cm)23-28
Thickness (mm)
Size7 8 9 10 11
Packaging1 pair/bag
12 pairs/bag
48 pairs/carton

Operating instructions

Instructions for use

It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the «CE»-type tests.

  • It is not recommended for persons sensitized to dithiocarbamates and to natural latex (wrist with elastic natural rubber).
  • Put the gloves on dry, clean hands.
  • Ensure the inside of the gloves is dry before putting them on again.
  • Inspect the gloves for cracks or snags before reusing them.
  • Nor to use them next to moving machinery

Storage conditions

Store the glove in their original packaging protected from heat, lightand humidity

Laundering conditions

Wipe gloves contaminated with oil or grease with a dry cloth before removing Performances of the gloves are guaranteed up to 5 cleaning cycles under the conditions described above: Use of a household or industrial washing machine and a standard liquid detergent, synthetic program temperature 60 ° C and spin drying at 400 rotations per minute. Improper use of the gloves or submitting them to a cleaning or laundering process that is not specifically recommended can alter their performance levels.

Drying conditions

Tumble drying at 60°C maximum.Put the gloves on dry, clean hands. Ensure the inside of the gloves is dry before putting them on again.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

More gloves

KryTech 582 - packshot
Cut Protection

KryTech 582

Special Grip&Proof nitrile coating provides better liquidproofness and grip in oily situations

KryTech 558 - packshot
Cut Protection

KryTech 558

Standard protection for intricate handling in reasonably clean environments

KryTech 599 - packshot
Cut Protection

KryTech 599

Cut, Grip and Skin Protection up to knuckle in oily environments. Unbeatable fingertip sensitivity.

To contact us

If you would like to ask us a commercial question about our products or if you would like to have more technical information about our gloves and their use, please fill out one of the forms proposed below.