AdvanTech 519
The chemical protection of nitrile combined with excellent mechanical resistance
-
CAT. 3
0334
-
2001X
-
Type B
JOT
-
Download the technical data sheet
Download other documents
Got a question? Contact
Specific advantages
Comfort
- Optimal dexterity without compromising chemical resistance
Skin protection
- Better resistance than natural latex gloves against organic solvents
- Recommended for people sensitive to the proteins in natural latex
- Hypoallergenic
Guaranteed quality
- Manufacturing process ensuring the control of a very low level of contaminants: particulate content, non-volatile residues, extractables => Washed, controlled and packaged in an ISO 5 room
- Silicone free to prevent traces, defects on metal sheet and glass prior to painting
Product detail
| Material | Nitrile |
|---|---|
| Colour | green |
| Interior finish | Chlorinated |
| Exterior finish | Chlorinated |
| Length (cm) | 33 |
| Thickness (mm) | 0.28 |
| Size | 7 8 9 10 |
| Packaging | 1 pair/bag 12 pairs/bag 72 pairs/carton |
Chemical chart
OVERALL CHEMICAL PROTECTION RATING
Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.
Meaning of the colours :
Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT: Not tested
NA: "Not applicable" because not fully tested (only degradation OR permeation results)
The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time
| Chemical Product | CAS # | Breakthrough time (minutes) |
Permeation level |
Standard | Degradation level |
Rating |
|---|---|---|---|---|---|---|
| 1,1,1-Trichloroethane 99% | 71-55-6 | 52 | 2 | ASTM F739 | 1 |
|
| 1,1,2,2-Tetrachloroethane 98% | 79-34-5 | 12 | 1 | ASTM F739 | 1 |
|
| 1,3 - Dichlorobenzene 98% | 541-73-1 | 19 | 1 | ASTM F739 | 1 |
|
| 1,3 Ethoxy propionate (Ethyl 3-ethoxypropionate) 99% | 763-69-9 | 76 | 3 | ASTM F739 | NT |
|
| 2-Butoxyethanol (Butyl Cellusolve) 99% | 111-76-2 | 250 | 5 | ASTM F739 | 2 |
|
| 2-Ethoxyethanol (Cellosolve) 99% | 110-80-5 | 216 | 4 | ASTM F739 | 3 |
|
| 2-Ethoxyethyl acetate (Cellosolve Acetate) 99% | 111-15-9 | 75 | 3 | ASTM F739 | NT |
|
| 2-Propanol (Isopropanol) 99% | 67-63-0 | 358 | 5 | EN 374-3:2003 | 4 |
|
| 2-Pyrrolidine 99% | 123-75-1 | 21 | 1 | ASTM F739 | NT |
|
| 2,2,2-Trifluoroethanol 99% | 75-89-8 | 11 | 1 | ASTM F739 | 1 |
|
| Acetic acid 10% | 64-19-7 | >480 | 6 | ASTM F739 | NT |
|
| Acetic acid 50% | 64-19-7 | >480 | 6 | ASTM F739 | 4 |
|
| Acetic acid 99% | 64-19-7 | 43 | 2 | ASTM F739 | 2 |
|
| Acetone 99% | 67-64-1 | 4 | 0 | ASTM F739 | 1 |
|
| Ammonium hydroxide solution 25% | 1336-21-6 | 63 | 3 | EN 16523-1:2015 | 4 |
|
| Ammonium hydroxide solution 29% | 1336-21-6 | 440 | 5 | ASTM F739 | 4 |
|
| Aniline 99% | 62-53-3 | 30 | 1 | ASTM F739 | 1 |
|
| Bioact 115 mixture | NA | 123 | 4 | ASTM F739 | NT |
|
| Butyl Acetate 99% | 123-86-4 | 12 | 1 | EN 374-3:2003 | 1 |
|
| Carbon Tetrachloride 99% | 56-23-5 | 243 | 5 | ASTM F739 | 3 |
|
| Chromic Acid 50% | 7738-94-5 | 261 | 5 | ASTM F739 | 4 |
|
| Cumene 98% | 98-82-8 | 189 | 4 | ASTM F739 | 4 |
|
| Cyclohexane 99% | 110-82-7 | >480 | 6 | ASTM F739 | 4 |
|
| Cyclopentanone 99% | 120-92-3 | 6 | 0 | ASTM F739 | NT |
|
| Diethanolamine 97% | 111-42-2 | >480 | 6 | ASTM F739 | 4 |
|
| Dimethylsulfoxide 99% | 67-68-5 | 53 | 2 | ASTM F739 | 1 |
|
| Ethanol 95% | 64-17-5 | 92 | 3 | ASTM F739 | 4 |
|
| Ether (Diethyl Ether) 99% | 60-29-7 | 20 | 1 | ASTM F739 | 1 |
|
| Ethyl L -(-)- lactate 98% | 687-47-8 | 152 | 4 | ASTM F739 | 2 |
|
| Ethylene glycol 99% | 107-21-1 | >480 | 6 | ASTM F739 | 4 |
|
| Formaldehyde 37% | 50-00-0 | >480 | 6 | EN 16523-1:2015 | 4 |
|
| Furfural 99% | 98-01-1 | 17 | 1 | ASTM F739 | 1 |
|
| Hexamethyldisilazane (HMDS) 98% | 999-97-3 | >480 | 6 | ASTM F739 | NT |
|
| Hydrazine 35% | 302-01-2 | >480 | 6 | ASTM F739 | 4 |
|
| Hydrazine 70% | 302-01-2 | >480 | 6 | ASTM F739 | 4 |
|
| Hydrochloric acid 10% | 7647-01-0 | >480 | 6 | EN 374-3:2003 | 4 |
|
| Hydrochloric acid 35% | 7647-01-0 | >480 | 6 | EN 374-3:2003 | 4 |
|
| Hydrochloric acid 37% | 7647-01-0 | >480 | 6 | ASTM F739 | 4 |
|
| Hydrofluoric Acid 49% | 7664-39-3 | 200 | 4 | ASTM F739 | 3 |
|
| Hydrogen peroxide 30% | 7722-84-1 | >480 | 6 | EN 16523-1:2015 | NT |
|
| Isobutyl alcohol 99% | 78-83-1 | >480 | 6 | ASTM F739 | 4 |
|
| Kerosene mixture | 8008-20-6 | >480 | 6 | ASTM F739 | 4 |
|
| m-Cresol 97% | 108-39-4 | 130 | 4 | ASTM F739 | 1 |
|
| Methanol 99% | 67-56-1 | 12 | 1 | EN 374-3:2003 | 1 |
|
| Methyl-3-methoxypropionate 100% | 3852-09-3 | 28 | 1 | ASTM F739 | 1 |
|
| Methylisobutylketone 99% | 108-10-1 | 18 | 1 | ASTM F739 | 1 |
|
| n-Heptane 99% | 142-82-5 | >480 | 6 | EN 374-3:2003 | 4 |
|
| n-hexane 95% | 110-54-3 | >480 | 6 | ASTM F739 | 4 |
|
| N-methyl-2-Pyrrolidone 99% | 872-50-4 | 21 | 1 | ASTM F739 | 1 |
|
| Naphtha mixture | 8030-30-6 | >480 | 6 | ASTM F739 | 4 |
|
| Naphtha VM&P mixture | 8032-32-4 | >480 | 6 | ASTM F739 | 4 |
|
| Nitric acid 70% | 7697-37-2 | 14 | 1 | ASTM F739 | NT |
|
| Nitrobenzene 99% | 98-95-3 | 17 | 1 | ASTM F739 | 1 |
|
| Nitrohydrochloric acid (Aqua Regia) mixture | 8007-56-5 | >480 | 6 | ASTM F739 | 4 |
|
| Oleum (free SO3) 67% | 8014-95-7 | 358 | 5 | ASTM F739 | NT |
|
| Phenol 85% | 108-95-2 | 111 | 3 | ASTM F739 | 1 |
|
| Phosphoric acid 75% | 7664-38-2 | >480 | 6 | ASTM F739 | 4 |
|
| Phosphoric acid 85% | 7664-38-2 | >480 | 6 | ASTM F739 | 4 |
|
| Polychlorinated Biphenyl (PCB) (50%) in 1,2,4-Trichlorobenzene mixture | 11097-69-1 | >180 | 4 | ASTM F739 | NT |
|
| Potassium Hydroxide 50% | 1310-58-3 | >480 | 6 | ASTM F739 | 4 |
|
| Propylene Glycol Methyl Ethyl Acetate (PGMEA) 99% | 108-65-6 | 103 | 3 | ASTM F739 | 3 |
|
| Propylene Glycol Monomethyl Ether 99% | 107-98-2 | 111 | 3 | ASTM F739 | 4 |
|
| Sodium hydroxide 20% | 1310-73-2 | >480 | 6 | EN 374-3:2003 | 4 |
|
| Sodium hydroxide 40% | 1310-73-2 | >480 | 6 | EN 374-3:2003 | 4 |
|
| Sodium hydroxide 50% | 1310-73-2 | >480 | 6 | EN 374-3:2003 | 4 |
|
| Styrene 99% | 100-42-5 | 5 | 0 | EN 374-3:2003 | NT |
|
| Sulfuric acid 10% | 7664-93-9 | >480 | 6 | EN 374-3:2003 | 4 |
|
| Sulfuric acid 40% | 7664-93-9 | >480 | 6 | EN 374-3:2003 | 4 |
|
| Sulfuric acid 96% | 7664-93-9 | 11 | 1 | EN 374-3:2003 | 1 |
|
| Tert. Amyl Methyl Ether 96% | 994-05-8 | >480 | 6 | ASTM F739 | 4 |
|
| Tetrachloroethylene (Perchloroethylene) 99% | 127-18-4 | 42 | 2 | EN 374-3:2003 | 2 |
|
| Tetraethyl Orthosilicate 100% | 78-10-4 | >480 | 6 | ASTM F739 | 4 |
|
| Tetramethyl Ammonium Hydroxide 25% | 75-59-2 | >720 | 6 | ASTM F739 | 4 |
|
| Toluene 99% | 108-88-3 | 6 | 0 | EN 374-3:2003 | 1 |
|
| Triethanolamine 98% | 102-71-6 | >480 | 6 | ASTM F739 | 4 |
|
| Trimethylphosphite 97% | 121-45-9 | 24 | 1 | ASTM F739 | NT |
|
| Turpentine mixture | 8006-64-2 | >480 | 6 | ASTM F739 | 4 |
|
| Unleaded gasoline mixture | 8006-61-9 | >480 | 6 | ASTM F739 | 4 |
|
| Xylene 99% | 1330-20-7 | 11 | 1 | EN 374-3:2003 | 1 |
|
*not normalized result
Need help finding the right chemical glove?
Discover our SAFE CHEM selection tool for chemical protection!
Do you have a question? Contact us!
If you have a question, need a sample or would like further technical information about our gloves and their use.
More gloves
Critical Environments
AdvanTech 522
A tripolymer exclusive that offers 100% comfort for optimal mechanical and chemical resistance
Critical Environments
AdvanTech 514
Unique tri-polymer construction offers 100% comfort for optimal mechanical and chemical resistance